devstack_custom/tools/xen/scripts/install-os-vpx.sh
2011-10-26 22:29:08 -07:00

508 lines
12 KiB
Bash
Executable file

#!/bin/bash
#
# Copyright (c) 2011 Citrix Systems, Inc.
# Copyright 2011 OpenStack LLC.
# Copyright (C) 2011 Nicira, Inc
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
set -eux
. /etc/xensource-inventory
NAME="XenServer OpenStack VPX"
DATA_VDI_SIZE="500MiB"
BRIDGE_M=
BRIDGE_P=
KERNEL_PARAMS=
VPX_FILE=os-vpx.xva
AS_TEMPLATE=
FROM_TEMPLATE=
RAM=
WAIT_FOR_NETWORK=
BALLOONING=
usage()
{
cat << EOF
Usage: $0 [-f FILE_PATH] [-d DISK_SIZE] [-v BRIDGE_NAME] [-m BRIDGE_NAME] [-p BRIDGE_NAME]
[-k PARAMS] [-r RAM] [-i|-c] [-w] [-b]
Installs XenServer OpenStack VPX.
OPTIONS:
-h Shows this message.
-i Install OpenStack VPX as template.
-c Clone from existing template.
-w Wait for the network settings to show up before exiting.
-b Enable memory ballooning. When set min_RAM=RAM/2 max_RAM=RAM.
-f path Specifies the path to the XVA.
Default to ./os-vpx.xva.
-d disk-size Specifies the size in MiB for the data disk.
Defaults to 500 MiB.
-m bridge Specifies the bridge for the isolated management network.
Defaults to xenbr0.
-v bridge Specifies the bridge for the vm network
-p bridge Specifies the bridge for the externally facing network.
-k params Specifies kernel parameters.
-r MiB Specifies RAM used by the VPX, in MiB.
By default it will take the value from the XVA.
EXAMPLES:
Create a VPX that connects to the isolated management network using the
default bridge with a data disk of 1GiB:
install-os-vpx.sh -f /root/os-vpx-devel.xva -d 1024
Create a VPX that connects to the isolated management network using xenbr1
as bridge:
install-os-vpx.sh -m xenbr1
Create a VPX that connects to both the management and public networks
using xenbr1 and xapi4 as bridges:
install-os-vpx.sh -m xenbr1 -p xapi4
Create a VPX that connects to both the management and public networks
using the default for management traffic:
install-os-vpx.sh -m xapi4
Create a VPX that automatically becomes the master:
install-os-vpx.sh -k geppetto_master=true
EOF
}
get_params()
{
while getopts "hicwbf:d:v:m:p:k:r:" OPTION;
do
case $OPTION in
h) usage
exit 1
;;
i)
AS_TEMPLATE=1
;;
c)
FROM_TEMPLATE=1
;;
w)
WAIT_FOR_NETWORK=1
;;
b)
BALLOONING=1
;;
f)
VPX_FILE=$OPTARG
;;
d)
DATA_VDI_SIZE="${OPTARG}MiB"
;;
m)
BRIDGE_M=$OPTARG
;;
p)
BRIDGE_P=$OPTARG
;;
k)
KERNEL_PARAMS=$OPTARG
;;
r)
RAM=$OPTARG
;;
v)
BRIDGE_V=$OPTARG
;;
?)
usage
exit
;;
esac
done
if [[ -z $BRIDGE_M ]]
then
BRIDGE_M=xenbr0
fi
}
xe_min()
{
local cmd="$1"
shift
xe "$cmd" --minimal "$@"
}
get_dest_sr()
{
IFS=,
sr_uuids=$(xe sr-list --minimal other-config:i18n-key=local-storage)
dest_sr=""
for sr_uuid in $sr_uuids
do
pbd=$(xe pbd-list --minimal sr-uuid=$sr_uuid host-uuid=$INSTALLATION_UUID)
if [ "$pbd" ]
then
echo "$sr_uuid"
unset IFS
return
fi
done
unset IFS
dest_sr=$(xe_min sr-list uuid=$(xe_min pool-list params=default-SR))
if [ "$dest_sr" = "" ]
then
echo "No local storage and no default storage; cannot import VPX." >&2
exit 1
else
echo "$dest_sr"
fi
}
find_network()
{
result=$(xe_min network-list bridge="$1")
if [ "$result" = "" ]
then
result=$(xe_min network-list name-label="$1")
fi
echo "$result"
}
find_template()
{
xe_min template-list other-config:os-vpx=true
}
renumber_system_disk()
{
local v="$1"
local vdi_uuid=$(xe_min vbd-list vm-uuid="$v" type=Disk userdevice=xvda \
params=vdi-uuid)
if [ "$vdi_uuid" ]
then
local vbd_uuid=$(xe_min vbd-list vm-uuid="$v" vdi-uuid="$vdi_uuid")
xe vbd-destroy uuid="$vbd_uuid"
local new_vbd_uuid=$(xe vbd-create vm-uuid="$v" vdi-uuid="$vdi_uuid" \
device=0 bootable=true type=Disk)
xe vbd-param-set other-config:owner uuid="$new_vbd_uuid"
fi
}
create_vif()
{
xe vif-create vm-uuid="$1" network-uuid="$2" device="$3"
}
create_gi_vif()
{
local v="$1"
# Note that we've made the outbound device eth1, so that it comes up after
# the guest installer VIF, which means that the outbound one wins in terms
# of gateway.
local gi_network_uuid=$(xe_min network-list \
other-config:is_guest_installer_network=true)
create_vif "$v" "$gi_network_uuid" "0" >/dev/null
}
create_vm_vif()
{
local v="$1"
echo "Installing management interface on $BRIDGE_V."
local out_network_uuid=$(find_network "$BRIDGE_V")
create_vif "$v" "$out_network_uuid" "1" >/dev/null
}
create_management_vif()
{
local v="$1"
echo "Installing management interface on $BRIDGE_M."
local out_network_uuid=$(find_network "$BRIDGE_M")
create_vif "$v" "$out_network_uuid" "2" >/dev/null
}
# This installs the interface for public traffic, only if a bridge is specified
# The interface is not configured at this stage, but it will be, once the admin
# tasks are complete for the services of this VPX
create_public_vif()
{
local v="$1"
if [[ -z $BRIDGE_P ]]
then
echo "Skipping installation of interface for public traffic."
else
echo "Installing public interface on $BRIDGE_P."
pub_network_uuid=$(find_network "$BRIDGE_P")
create_vif "$v" "$pub_network_uuid" "3" >/dev/null
fi
}
label_system_disk()
{
local v="$1"
local vdi_uuid=$(xe_min vbd-list vm-uuid="$v" type=Disk userdevice=0 \
params=vdi-uuid)
xe vdi-param-set \
name-label="$NAME system disk" \
other-config:os-vpx=true \
uuid=$vdi_uuid
}
create_data_disk()
{
local v="$1"
local sys_vdi_uuid=$(xe_min vbd-list vm-uuid="$v" type=Disk params=vdi-uuid)
local data_vdi_uuid=$(xe_min vdi-list other-config:os-vpx-data=true)
if echo "$data_vdi_uuid" | grep -q ,
then
echo "Multiple data disks found -- assuming that you want a new one."
data_vdi_uuid=""
else
data_in_use=$(xe_min vbd-list vdi-uuid="$data_vdi_uuid")
if [ "$data_in_use" != "" ]
then
echo "Data disk already in use -- will create another one."
data_vdi_uuid=""
fi
fi
if [ "$data_vdi_uuid" = "" ]
then
echo -n "Creating new data disk ($DATA_VDI_SIZE)... "
sr_uuid=$(xe_min vdi-list params=sr-uuid uuid="$sys_vdi_uuid")
data_vdi_uuid=$(xe vdi-create name-label="$NAME data disk" \
sr-uuid="$sr_uuid" \
type=user \
virtual-size="$DATA_VDI_SIZE")
xe vdi-param-set \
other-config:os-vpx-data=true \
uuid="$data_vdi_uuid"
dom0_uuid=$(xe_min vm-list is-control-domain=true)
vbd_uuid=$(xe vbd-create device=autodetect type=Disk \
vdi-uuid="$data_vdi_uuid" vm-uuid="$dom0_uuid")
xe vbd-plug uuid=$vbd_uuid
dev=$(xe_min vbd-list params=device uuid=$vbd_uuid)
mke2fs -q -j -m0 /dev/$dev
e2label /dev/$dev vpxstate
xe vbd-unplug uuid=$vbd_uuid
xe vbd-destroy uuid=$vbd_uuid
else
echo -n "Attaching old data disk... "
fi
vbd_uuid=$(xe vbd-create device=2 type=Disk \
vdi-uuid="$data_vdi_uuid" vm-uuid="$v")
xe vbd-param-set other-config:os-vpx-data=true uuid=$vbd_uuid
echo "done."
}
set_kernel_params()
{
local v="$1"
local args=$KERNEL_PARAMS
local cmdline=$(cat /proc/cmdline)
for word in $cmdline
do
if echo "$word" | grep -q "geppetto"
then
args="$word $args"
fi
done
if [ "$args" != "" ]
then
echo "Passing Geppetto args to VPX: $args."
xe vm-param-set PV-args="$args" uuid="$v"
fi
}
set_memory()
{
local v="$1"
if [ "$RAM" != "" ]
then
echo "Setting RAM to $RAM MiB."
[ "$BALLOONING" == 1 ] && RAM_MIN=$(($RAM / 2)) || RAM_MIN=$RAM
xe vm-memory-limits-set static-min=16MiB static-max=${RAM}MiB \
dynamic-min=${RAM_MIN}MiB dynamic-max=${RAM}MiB \
uuid="$v"
fi
}
# Make the VM auto-start on server boot.
set_auto_start()
{
local v="$1"
xe vm-param-set uuid="$v" other-config:auto_poweron=true
}
set_all()
{
local v="$1"
set_kernel_params "$v"
set_memory "$v"
set_auto_start "$v"
label_system_disk "$v"
create_gi_vif "$v"
create_vm_vif "$v"
create_management_vif "$v"
create_public_vif "$v"
}
log_vifs()
{
local v="$1"
(IFS=,
for vif in $(xe_min vif-list vm-uuid="$v")
do
dev=$(xe_min vif-list uuid="$vif" params=device)
mac=$(xe_min vif-list uuid="$vif" params=MAC | sed -e 's/:/-/g')
echo "eth$dev has MAC $mac."
done
unset IFS) | sort
}
destroy_vifs()
{
local v="$1"
IFS=,
for vif in $(xe_min vif-list vm-uuid="$v")
do
xe vif-destroy uuid="$vif"
done
unset IFS
}
get_params "$@"
thisdir=$(dirname "$0")
if [ "$FROM_TEMPLATE" ]
then
template_uuid=$(find_template)
name=$(xe_min template-list params=name-label uuid="$template_uuid")
echo -n "Cloning $name... "
vm_uuid=$(xe vm-clone vm="$template_uuid" new-name-label="$name")
xe vm-param-set is-a-template=false uuid="$vm_uuid"
echo $vm_uuid.
destroy_vifs "$vm_uuid"
set_all "$vm_uuid"
else
if [ ! -f "$VPX_FILE" ]
then
# Search $thisdir/$VPX_FILE too. In particular, this is used when
# installing the VPX from the supp-pack, because we want to be able to
# invoke this script from the RPM and the firstboot script.
if [ -f "$thisdir/$VPX_FILE" ]
then
VPX_FILE="$thisdir/$VPX_FILE"
else
echo "$VPX_FILE does not exist." >&2
exit 1
fi
fi
echo "Found OS-VPX File: $VPX_FILE. "
dest_sr=$(get_dest_sr)
echo -n "Installing $NAME... "
vm_uuid=$(xe vm-import filename=$VPX_FILE sr-uuid="$dest_sr")
echo $vm_uuid.
renumber_system_disk "$vm_uuid"
nl=$(xe_min vm-list params=name-label uuid=$vm_uuid)
xe vm-param-set \
"name-label=${nl/ import/}" \
other-config:os-vpx=true \
uuid=$vm_uuid
set_all "$vm_uuid"
create_data_disk "$vm_uuid"
if [ "$AS_TEMPLATE" ]
then
xe vm-param-set uuid="$vm_uuid" is-a-template=true \
other-config:instant=true
echo -n "Installing VPX from template... "
vm_uuid=$(xe vm-clone vm="$vm_uuid" new-name-label="${nl/ import/}")
xe vm-param-set is-a-template=false uuid="$vm_uuid"
echo "$vm_uuid."
fi
fi
log_vifs "$vm_uuid"
echo -n "Starting VM... "
xe vm-start uuid=$vm_uuid
echo "done."
show_ip()
{
ip_addr=$(echo "$1" | sed -n "s,^.*"$2"/ip: \([^;]*\).*$,\1,p")
echo -n "IP address for $3: "
if [ "$ip_addr" = "" ]
then
echo "did not appear."
else
echo "$ip_addr."
fi
}
if [ "$WAIT_FOR_NETWORK" ]
then
echo "Waiting for network configuration... "
i=0
while [ $i -lt 600 ]
do
ip=$(xe_min vm-list params=networks uuid=$vm_uuid)
if [ "$ip" != "<not in database>" ]
then
show_ip "$ip" "1" "$BRIDGE_M"
if [[ $BRIDGE_P ]]
then
show_ip "$ip" "2" "$BRIDGE_P"
fi
echo "Installation complete."
exit 0
fi
sleep 10
let i=i+1
done
fi