optimize studs in all other parts too

This commit is contained in:
josch 2014-09-11 15:52:50 +02:00
parent acf8afe77d
commit 64ab9d1f39

View file

@ -319,18 +319,16 @@ def render_part(part):
# handle bricks, plates and slope brick 31 #
###################################################
if m.group('type') == 'Baseplate':
#for z in range(studsz):
# for x in range(studsx):
# files.append(((studsx/2.0 - x)*20 - 10, 0, (studsz/2.0 - z)*20 - 10,1,0,0,0,1,0,0,0,1,"stud1.dat"))
rects = subdivide((-studsx/2.0,-studsz/2.0,studsx,studsz))
for x,z,s in rects:
files.append(((x+s/2)*20, 0, (z+s/2)*20,1,0,0,0,1,0,0,0,1,"stud%d.dat"%s))
files.append(((x+s/2.0)*20, 0, (z+s/2.0)*20,1,0,0,0,1,0,0,0,1,"stud%d.dat"%s))
files.append((-studsx*10,0,-studsz*10,studsx*20,0,0,0,4,0,0,0,studsz*20,"box.dat"))
elif m.group('type') in ['Brick', 'Plate'] and m.group('corner'):
for z in range(studsz):
for x in range(studsx):
if z >= studsz/2 or x >= studsx/2:
files.append(((studsx/2.0 - x)*20 - 10, 0, (studsz/2.0 - z)*20 - 10,1,0,0,0,1,0,0,0,1,"stud1.dat"))
for z in [0,1]:
for x in [0,1]:
if z == 0 and x == 0:
continue
files.append((-x*studsx*10+studsx*5, 0, -studsz*z*10+studsz*5,1,0,0,0,1,0,0,0,1,"stud%d.dat"%(studsz/2)))
# create top, bottom, inner and outer rectangles
# draw an L
coords = [(0,0),(1,0),(1,-1),(-1,-1),(-1,1),(0,1)]
@ -369,9 +367,9 @@ def render_part(part):
if m.group('centerstud'):
files.append((0,0,0,1,0,0,0,1,0,0,0,1,"stud1.dat"))
elif m.group('type') not in ['Slope Brick 31', 'Tile']:
for z in range(studsz):
for x in range(studsx):
files.append(((studsx/2.0 - x)*20 - 10, 0, (studsz/2.0 - z)*20 - 10,1,0,0,0,1,0,0,0,1,"stud1.dat"))
rects = subdivide((-studsx/2.0,-studsz/2.0,studsx,studsz))
for x,z,s in rects:
files.append(((x+s/2.0)*20, 0, (z+s/2.0)*20,1,0,0,0,1,0,0,0,1,"stud%d.dat"%s))
# outer box
files.append((-studsx*10,0,-studsz*10,studsx*20,0,0,0,height,0,0,0,studsz*20,"openbox.dat"))
# inner box
@ -524,9 +522,9 @@ def render_part(part):
###################################################
else:
if m.group('slope') in ['Inverted', 'Inverted Double Convex']:
for z in range(studsz):
for x in range(studsx):
files.append(((studsx/2.0 - x)*20 - 10, 0, (studsz/2.0 - z)*20 - 10,1,0,0,0,1,0,0,0,1,"stud1.dat"))
rects = subdivide((-studsx/2.0,-studsz/2.0,studsx,studsz))
for x,z,s in rects:
files.append(((x+s/2.0)*20, 0, (z+s/2.0)*20,1,0,0,0,1,0,0,0,1,"stud%d.dat"%s))
elif m.group('slope') == 'Double Convex':
files.append((-10*(studsx-1), 0, 10*(studsz-1),1,0,0,0,1,0,0,0,1,"stud1.dat"))
elif m.group('slope') == 'Double Concave':