From 9cd8821188770a5e1149bee3d1bfd0858604daf4 Mon Sep 17 00:00:00 2001
From: Johannes 'josch' Schauer <josch@mister-muffin.de>
Date: Fri, 27 Jan 2017 23:35:14 +0100
Subject: [PATCH] Synthetic commit adding the delta for the move from svn to
 github

---
 debian/control        |    4 +-
 debian/copyright      |    2 +-
 doc/po/multistrap.pot | 1849 +++++++++++++++++++++++++++++++++++++++++
 doc/po4a.config       |    4 +
 po/multistrap.pot     |  743 +++++++++++++++++
 5 files changed, 2599 insertions(+), 3 deletions(-)
 create mode 100644 doc/po/multistrap.pot
 create mode 100644 doc/po4a.config
 create mode 100644 po/multistrap.pot

diff --git a/debian/control b/debian/control
index bbc6718..d5be7c3 100644
--- a/debian/control
+++ b/debian/control
@@ -7,8 +7,8 @@ Build-Depends: cdbs, debhelper (>= 7), po4a (>= 0.37.1)
 Build-Depends-Indep: intltool
 Standards-Version: 3.9.4
 Homepage: http://www.emdebian.org/multistrap
-Vcs-Browser: http://www.emdebian.org/trac/browser/current/
-Vcs-Svn: http://www.emdebian.org/svn/current/
+Vcs-Browser: http://www.emdebian.org/trac/browser/current/host/trunk/multistrap/trunk/
+Vcs-Svn: http://www.emdebian.org/svn/current/host/trunk/multistrap/trunk/
 
 Package: multistrap
 Section: admin
diff --git a/debian/copyright b/debian/copyright
index ba67c0b..cb796f1 100644
--- a/debian/copyright
+++ b/debian/copyright
@@ -1,5 +1,5 @@
 This package was downloaded from
-http://buildd.emdebian.org/svn/browser/current/
+http://buildd.emdebian.org/svn/browser/current/host/trunk/multistrap/trunk/
 
 Files: debian/*
 Licence: GPL-3+
diff --git a/doc/po/multistrap.pot b/doc/po/multistrap.pot
new file mode 100644
index 0000000..33c717f
--- /dev/null
+++ b/doc/po/multistrap.pot
@@ -0,0 +1,1849 @@
+# SOME DESCRIPTIVE TITLE
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 2013-08-11 14:22+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. type: =head1
+#: pod/multistrap:3 device-table.pl:165
+msgid "Name"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:5
+msgid "multistrap - multiple repository bootstraps"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:7 device-table.pl:169
+msgid "Synopsis"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:9
+#, no-wrap
+msgid ""
+" multistrap [-a ARCH] [-d DIR] -f CONFIG_FILE\n"
+" multistrap [--simulate] -f CONFIG_FILE\n"
+" multistrap -?|-h|--help|--version\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:13 device-table.pl:174
+msgid "Options"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:15
+msgid "-?|-h|--help|--version - output the help text and exit successfully."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:17
+msgid ""
+"--dry-run - collate all the configuration settings and output a bare "
+"summary."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:20
+msgid "--simulate - same as --dry-run"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:22
+msgid "(The following options can also be set in the configuration file.)"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:24
+msgid "-a|--arch - architecture of the packages to put into the multistrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:26
+msgid "-d|--dir - directory into which the bootstrap will be installed."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:28
+msgid "-f|--file - configuration file for multistrap [required]"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:30
+msgid "-s|--shortcut - shortened version of -f for files in known locations."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:32
+msgid ""
+"--tidy-up - remove apt cache data, downloaded Packages files and the apt "
+"package cache. Same as cleanup=true."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:35
+msgid ""
+"--no-auth - allow the use of unauthenticated repositories. Same as "
+"noauth=true"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:38
+msgid ""
+"--source-dir DIR - move the contents of var/cache/apt/archives/ from inside "
+"the chroot to the specified external directory, then add the Debian source "
+"packages for each used binary. Same as retainsources=DIR If the specified "
+"directory does not exist, nothing is done. Requires --tidy-up in order to "
+"calculate the full list of source packages, including dependencies."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:45
+msgid "Description"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:47
+msgid ""
+"multistrap provides a debootstrap-like method based on apt and extended to "
+"provide support for multiple repositories, using a configuration file to "
+"specify the relevant suites, architecture, extra packages and the mirror to "
+"use for each bootstrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:52
+msgid ""
+"The aim is to create a complete bootstrap / root filesystem with all "
+"packages installed and configured, instead of just the base system."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:56
+msgid ""
+"In most cases, users will need to create a configuration file for each "
+"different multistrap usage."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:59
+msgid "Example configuration:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:61
+#, no-wrap
+msgid ""
+" [General]\n"
+" arch=armel\n"
+" directory=/opt/multistrap/\n"
+" # same as --tidy-up option if set to true\n"
+" cleanup=true\n"
+" # same as --no-auth option if set to true\n"
+" # keyring packages listed in each bootstrap will\n"
+" # still be installed.\n"
+" noauth=false\n"
+" # extract all downloaded archives (default is true)\n"
+" unpack=true\n"
+" # whether to add the /suite to be explicit about where apt\n"
+" # needs to look for packages. Default is false.\n"
+" explicitsuite=false\n"
+" # enable MultiArch for the specified architectures\n"
+" # default is empty\n"
+" multiarch=\n"
+" # aptsources is a list of sections to be used\n"
+" # the /etc/apt/sources.list.d/multistrap.sources.list\n"
+" # of the target. Order is not important\n"
+" aptsources=Debian\n"
+" # the bootstrap option determines which repository\n"
+" # is used to calculate the list of Priority: required packages\n"
+" # and which packages go into the rootfs.\n"
+" # The order of sections is not important.\n"
+" bootstrap=Debian\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:88 pod/multistrap:219
+#, no-wrap
+msgid ""
+" [Debian]\n"
+" packages=\n"
+" source=http://ftp.uk.debian.org/debian\n"
+" keyring=debian-archive-keyring\n"
+" suite=lenny\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:94
+msgid ""
+"This will result in a completely normal bootstrap of Debian lenny from the "
+"specified mirror, for armel in '/opt/multistrap/'. (This configuration is "
+"retained in the package as F</usr/share/multistrap/lenny.conf>)"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:98
+msgid ""
+"Specify a package to extend the multistrap to include that package and all "
+"dependencies of that package."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:101
+msgid ""
+"Specify more repositories for the bootstrap by adding new sections.  Section "
+"names need to be listed in the bootstrap general option for the packages to "
+"be included in the bootstrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:105
+msgid ""
+"Specify which repositories will be available to the final system at boot by "
+"listing the section names in the aptsources general option, e.g. to exclude "
+"some internal sources or when using a local mirror when building the rootfs."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:110
+msgid "Section names are case-insensitive."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:112
+msgid ""
+"All dependencies are resolved only by apt, using all bootstrap repositories, "
+"to use only the most recent and most suitable dependencies. Note that "
+"multistrap turns off Install-Recommends so if the multistrap needs a package "
+"that is only a Recommended dependency, the recommended package needs to be "
+"specified in the packages line explicitly. See C<Explicit suite "
+"specification> for more information on getting specific packages from "
+"specific suites."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:120
+msgid ""
+"'Architecture' and 'directory' can be overridden on the command line.  Some "
+"other general options also have command line options."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:123
+msgid "Online examples and documentation"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:125
+msgid ""
+"C<multistrap> supports a range of permutations, see the wiki and the "
+"emdebian website for more information and example configurations:"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:128
+msgid "http://wiki.debian.org/Multistrap"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:130
+msgid "http://www.emdebian.org/multistrap/"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:132
+msgid ""
+"C<multistrap> includes an example configuration file with a full list of all "
+"supported config file options: "
+"F</usr/share/doc/multistrap/examples/full.conf>"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:135
+msgid "Shortcuts"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:137
+msgid ""
+"In a similar manner to C<debootstrap>, C<multistrap> supports referring to "
+"configuration files in known locations by shortcuts. When using the "
+"C<--shortcut> option, C<multistrap> will look for files in "
+"F</usr/share/multistrap> and then F</etc/multistrap.d/>, appending a '.conf' "
+"suffix to the specified shortcut."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:143
+msgid "These two commands are equivalent:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:145
+#, no-wrap
+msgid ""
+" $ sudo multistrap -s sid\n"
+" $ sudo multistrap -f /usr/share/multistrap/sid.conf\n"
+" \n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:148
+msgid ""
+"Note that C<multistrap> will still fail if the configuration file itself "
+"does not set the directory or the architecture."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:151
+msgid "Repositories"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:153
+msgid ""
+"C<aptsources> lists the sections which should be used to create the "
+"F</etc/apt/sources.list.d/multistrap.list> apt sources in the final "
+"system. Not all C<aptsources> have to appear in the C<bootstrap> section if "
+"you have some internal or local sources which are not accessible to the "
+"installed root filesystem."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:159
+msgid ""
+"C<bootstrap> lists the sections which will be used to create the multistrap "
+"itself. Only packages listed in C<bootstrap> will be downloaded and unpacked "
+"by multistrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:163
+msgid ""
+"Make sure C<bootstrap> lists all sections you need for apt to be able to "
+"find all the packages to be unpacked for the multistrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:166
+msgid ""
+"(Older versions of multistrap supported the same option under the "
+"C<debootstrap> name - this spelling is still supported but new configuration "
+"files should be C<bootstrap> instead."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:170
+msgid "General settings:"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:172
+msgid "'arch' can be overridden on the command line using the C<--arch> option."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:174
+msgid ""
+"'directory' specifies the top level directory where the bootstrap will be "
+"created - it is not packed into a .tgz once complete."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:177
+msgid ""
+"'bootstrap' lists the Sections which will be used to specify the packages "
+"which will be downloaded (and optionally unpacked) into the bootstrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:180
+msgid ""
+"'aptsources' lists the Sections which will be used to specify the apt "
+"sources in the final system, e.g. if you need to use a local repository to "
+"generate the rootfs which will not be available to the device at runtime, "
+"list that section in C<bootstrap> but not in C<aptsources>."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:185
+msgid ""
+"If you want a package to be in the rootfs, it B<must> be specified in the "
+"C<bootstrap> list under General."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:188
+msgid "The order of section names in either list is not important."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:190
+msgid ""
+"If C<markauto> is set to true, C<multistrap> will request apt to mark all "
+"packages specified in the combined C<packages> list as manually installed "
+"and all dependencies not explicitly listed as automatically installed in the "
+"APT extended state database. C<markauto> can be used independently of "
+"C<unpack>."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:196
+msgid ""
+"As with debootstrap, multistrap will continue after errors, as long as the "
+"configuration file can be correctly parsed."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:199
+msgid ""
+"multistrap also implements the machine:variant support originally used in "
+"Emdebian Crush, although in a different implementation. Using the cascading "
+"configuration support, particular machine:variant combinations can be "
+"supported by simple changes on the command line."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:204
+msgid ""
+"Setting C<tarballname> to true also packs up the final filesystem into a "
+"tarball."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:207
+msgid ""
+"Note that multistrap ignores any unrecognised options in the config file - "
+"this allows for backwards-compatible behaviour as well as overloading the "
+"multistrap config files to support other tools (like pbuilder). Use the "
+"C<--simulate> option to see the combined configuration settings."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:213
+msgid ""
+"However, if the config file itself cannot be parsed, multistrap will "
+"abort. Check that the config file has a key and a value for each line, other "
+"than comments. Values must all on the same line as the key."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:217
+msgid "Section settings"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:225
+msgid ""
+"The section name (in [] brackets) needs to be unique for this configuration "
+"file and any configuration files which this file includes. Section names are "
+"case insensitive (all comparisons happen after conversion to lower case)."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:230
+msgid ""
+"'packages' is the list of packages to be added when this Section is listed "
+"in C<bootstrap> - all package names must be listed on a single line or the "
+"file will fail to parse. One alternative is to define your list of packages "
+"as multiple groups with packages separated on a functional / dependency "
+"basis, e.g. base, Xorg, networking etc. and list each group under "
+"'bootstrap'."
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:237
+#, no-wrap
+msgid ""
+" bootstrap=base networking\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:239
+#, no-wrap
+msgid ""
+" [base]\n"
+" packages=udev mtd-utils\n"
+" source=http://www.emdebian.org/grip\n"
+" keyring=emdebian-archive-keyring\n"
+" suite=lenny\n"
+"\n"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:245
+#, no-wrap
+msgid ""
+" [networking]\n"
+" packages=netbase ifupdown iproute net-tools samba\n"
+" source=http://www.emdebian.org/grip\n"
+" keyring=emdebian-archive-keyring\n"
+" suite=lenny\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:251
+msgid ""
+"As a special case, C<multistrap> also supports multiple packages keys per "
+"section, one line for each. Other keys cannot be repeated in this manner."
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:255
+#, no-wrap
+msgid ""
+" [Emdebian]\n"
+" packages=udev mtd-utils netbase ifupdown iproute\n"
+" packages=busybox net-tools samba\n"
+" source=http://www.emdebian.org/grip\n"
+" keyring=emdebian-archive-keyring\n"
+" suite=lenny\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:262
+msgid ""
+"'source' is the apt source to use for this Section. To use a local source on "
+"the same machine, ensure you use C<copy://> not C<file://>, so that apt is "
+"told to copy the packages into the rootfs instead of assuming it can try to "
+"download them later - because that \"later\" will never actually happen."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:268
+msgid ""
+"'keyring' lists the package which contains the key used by the source listed "
+"in this Section. If no keyring is specified, the C<noauth> option must be "
+"set to B<true>. See Secure Apt."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:272
+msgid ""
+"'suite' is the suite to use from this source. Note that this should be the "
+"suite, not the codename."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:275
+msgid ""
+"Suites change from time to time: (oldstable, stable, testing, sid)  The "
+"codename (etch, lenny, squeeze, sid) does not change."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:278
+msgid "Secure Apt"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:280
+msgid ""
+"To use authenticated apt repositories, multistrap needs to be able to "
+"install an appropriate keyring package from the existing apt sources "
+"B<outside the multistrap environment> into the destination "
+"system. Unfortunately, keyring packages cannot be downloaded from the "
+"repositories specified in the multistrap configuration - this is because "
+"C<apt> needs the keyring to be updated before being able to use repositories "
+"not previously known."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:288
+msgid ""
+"If relevant packages exist, specify them in the 'keyring' option for each "
+"repository. multistrap will then check that apt has already installed this "
+"package so that the repository can be authenticated before any packages are "
+"downloaded from it."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:293
+msgid ""
+"Note that B<all> repositories to be used with multistrap must be "
+"authenticated or apt will fail. Similarly, secure apt can only be disabled "
+"for all repositories (by using the --no-auth command line option or setting "
+"the general noauth option in the configuration file), even if only one "
+"repository does not have a suitable keyring available."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:300
+msgid ""
+"The keyring package(s) will also be installed inside the multistrap "
+"environment to match the installed apt sources for the multistrap."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:303
+msgid "State"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:305
+msgid ""
+"multistrap is stateless - if the directory exists, it will simply proceed as "
+"normal and apt will try to pick up where it left off."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:308
+msgid "Root Filesystem Configuration"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:310
+msgid ""
+"multistrap unpacks the downloaded packages but other stages of system "
+"configuration are not attempted. Examples include:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:313
+#, no-wrap
+msgid ""
+" /etc/inittab\n"
+" /etc/fstab\n"
+" /etc/hosts\n"
+" /etc/securetty\n"
+" /etc/modules\n"
+" /etc/hostname\n"
+" /etc/network/interfaces\n"
+" /etc/init.d\n"
+" /etc/dhcp3 \n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:323
+msgid ""
+"Any device-specific device nodes will also need to be created using MAKEDEV "
+"or C<device-table.pl> - a helper script that can work around some of the "
+"issues with MAKEDEV. F<device-table.pl> requires a device table file along "
+"the lines of the one in the mtd-utils source package.  See "
+"F</usr/share/doc/multistrap/examples/device_table.txt>"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:329
+msgid ""
+"Once multistrap has successfully created the basic file and directory "
+"layout, other device-specific scripts are needed before the filesystem can "
+"be packaged up and installed onto the target device."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:334
+msgid ""
+"Once installed, the packages themselves need to be configured using the "
+"package maintainer scripts and C<dpkg --configure -a>, unless this is a "
+"native multistrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:338
+msgid ""
+"For C<dpkg> to work, F</proc> and F</sysfs> must be mounted (or mountable), "
+"F</dev/pts> is also recommended."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:341
+msgid "See also: http://wiki.debian.org/Multistrap"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:343
+msgid "Environment"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:345
+msgid ""
+"To configure the unpacked packages (whether in native or cross mode), "
+"certain environment variables are needed:"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:348
+msgid "Debconf needs to be told to accept that user interaction is not desired:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:351
+#, no-wrap
+msgid ""
+" DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:353
+msgid ""
+"Perl needs to be told to accept that no locales are available inside the "
+"chroot and not to complain:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:356
+#, no-wrap
+msgid ""
+" LC_ALL=C LANGUAGE=C LANG=C\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:358
+msgid "Then, dpkg can configure the packages:"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:360
+msgid "chroot method (PATH = top directory of chroot):"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:362
+#, no-wrap
+msgid ""
+" DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true \\\n"
+" LC_ALL=C LANGUAGE=C LANG=C chroot /PATH/ dpkg --configure -a\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:365
+msgid "at a login shell:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:367
+#, no-wrap
+msgid ""
+" # export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true\n"
+" # export LC_ALL=C LANGUAGE=C LANG=C \n"
+" # dpkg --configure -a\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:371
+msgid "(As above, dpkg needs F</proc> and F</sysfs> mounted first.)"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:373
+msgid "Native mode - multistrap"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:375
+msgid ""
+"multistrap was not intended for native support, it was developed for cross "
+"architecture support. In order for multiple repositories to be used, "
+"multistrap only unpacks the packages selected by apt."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:379
+msgid ""
+"In native mode, various post-multistrap operations are likely to be needed "
+"that debootstrap would do for you:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:382
+#, no-wrap
+msgid ""
+" 1. copy /etc/hosts into the chroot\n"
+" 2. clean the environment to unset LANGUAGE, LC_ALL and LANG\n"
+"    to silence nuisance perl warnings that obscure other errors\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:386
+msgid ""
+"(An alternative to unset the localisation variables is to add locales to "
+"your multistrap configuration file in the 'packages' option."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:390
+msgid ""
+"A native multistrap can be used directly with chroot, so C<multistrap> runs "
+"C<dpkg --configure -a> at the end of the multistrap process, unless the "
+"B<ignorenativearch> option is set to true in the B<General> section of the "
+"configuration file."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:395
+msgid "Daemons in chroots"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:397
+msgid ""
+"Depending on which system you using to provide the packages for "
+"C<multistrap>, native chroots should generally not allow daemons to start "
+"inside the chroot. Use the F</usr/share/multistrap/chroot.sh> as your "
+"C<setupscript> or include that script in your own setup script."
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:402
+#, no-wrap
+msgid ""
+" setupscript=/usr/share/multistrap/chroot.sh\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:404
+msgid "F<chroot.sh> copes with systems using F<sysvinit> and F<upstart>."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:406
+msgid "See also"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:408
+#, no-wrap
+msgid ""
+" http://people.debian.org/~hmh/invokerc.d-policyrc.d-specification.txt\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:410
+msgid "Cascading configuration"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:412
+msgid ""
+"To support multiple variants of a basic (common) configuration, "
+"C<multistrap> allows configuration files to include other (more general)  "
+"configuration files. i.e. the most detailed / specific configuration file is "
+"specified on the command line and that file includes another file which is "
+"shared by other configurations."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:418
+msgid "Base file:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:420
+#, no-wrap
+msgid ""
+" /usr/share/multistrap/crosschroot.conf\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:422
+msgid "Variations:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:424
+#, no-wrap
+msgid ""
+" /usr/share/multistrap/armel.conf\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:426
+msgid ""
+"Specifying just the armel.conf file will get the rest of the settings from "
+"crosschroot.conf so that common changes only need to be made in a single "
+"file."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:430
+msgid ""
+"It is B<strongly> recommended that any changes to the configuration files "
+"involved in any particular cascade are tested using the C<--simulate> option "
+"to multistrap which will output a summary of the options that have been set "
+"once the cascade is complete. Note that multistrap does B<not warn you> if a "
+"configuration file contains an unrecognised option (for future compatibility "
+"with backported configurations), so a simple typo can result in an option "
+"not being set."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:438
+msgid "Machine:variant support"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:440
+msgid ""
+"The old packages.conf variables from emsandbox can all be converted into "
+"C<multistrap> configuration variables. The machine:variant support in "
+"C<multistrap> concentrates on the scripts, F<config.sh> and F<setup.sh>"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:445
+msgid ""
+"Note: B<machine:variant support is likely to be replaced by the hook "
+"functionality described below.>"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:448
+msgid ""
+"Once C<multistrap> has unpacked the downloaded packages, the C<setup.sh> can "
+"be called, passing the location and architecture of the root filesystem, so "
+"that other fine tuning can take place. At this stage, any operations inside "
+"a foreign architecture rootfs must not try to execute any binaries within "
+"the rootfs. As the final stage of the multistrap process, C<config.sh> is "
+"copied into the root directory of the rootfs."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:456
+msgid ""
+"One advantage of using machine:variant support is that the entire "
+"rootfilesystem can be managed by a single call to multistrap - this is "
+"useful when building root filesystems in userspace."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:460
+msgid ""
+"To enable machine:variant support, specify the path to the scripts to be "
+"called in the variant configuration file (General section):"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:463
+#, no-wrap
+msgid ""
+" [General]\n"
+" include=/path/to/general.conf\n"
+" setupscript=/path/to/setup.sh\n"
+" configscript=/path/to/config.sh\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:468
+msgid ""
+"Ensure that both the setupscript and the configscript are executable or "
+"C<multistrap> will ignore the script."
+msgstr ""
+
+#. type: =item
+#: pod/multistrap:473
+msgid "Example configscript.sh"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:475 pod/multistrap:733
+#, no-wrap
+msgid ""
+" #!/bin/sh\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:477 pod/multistrap:735
+#, no-wrap
+msgid ""
+" set -e\n"
+" \n"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:479
+#, no-wrap
+msgid ""
+" export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true\n"
+" export LC_ALL=C LANGUAGE=C LANG=C\n"
+" /var/lib/dpkg/info/dash.preinst install\n"
+" dpkg --configure -a\n"
+" mount proc -t proc /proc\n"
+" dpkg --configure -a\n"
+" umount /proc\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:487
+msgid "For more information, see the Wiki: http://wiki.debian.org/Multistrap"
+msgstr ""
+
+#. type: =item
+#: pod/multistrap:490
+msgid "Mounting /dev and /proc for chroot configuration"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:492
+msgid "/proc can be mounted inside the chroot, as above:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:494
+#, no-wrap
+msgid ""
+" mount proc -t proc /proc\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:496
+msgid ""
+"However, /dev should be mounted from outside the chroot, before running any "
+"C<configscript.sh> in the chroot:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:499
+#, no-wrap
+msgid ""
+" cd /path/chroot/\n"
+" sudo tar -xzf /path/multistrap.tgz\n"
+" sudo mount /dev -o bind ./dev/\n"
+" sudo chroot . ./configscript.sh || true\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:506
+msgid "Restricting package selection"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:508
+msgid ""
+"C<multistrap> includes Required packages by default, the current list of "
+"packages on your own machine can be seen using:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:511
+#, no-wrap
+msgid ""
+" grep-available  -FPriority 'required' -sPackage\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:513
+msgid ""
+"(The actual list is calculated from the downloaded Packages files and may "
+"differ from the output of C<grep-available>.)"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:516
+msgid ""
+"If the OmitRequired option is set to true, these packages will not be added "
+"- whilst useful, this option can easily lead to a useless rootfs. Only the "
+"packages specified manually in the configuration files will be used in the "
+"calculations - dependencies of those packages will be added but no others."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:522
+msgid "Adding Priority: important packages"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:524
+msgid ""
+"C<multistrap> can imitate C<debootstrap> by automatically adding all "
+"packages from all sections where the downloaded Packages file lists the "
+"package as Priority: important. The default is not to add such packages "
+"unless individually included in a C<packages=> option in a section specified "
+"in the C<bootstrap> general option. To add all such packages, set the "
+"addimportant option to true in the general section."
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:532
+#, no-wrap
+msgid ""
+" addimportant=true\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:534
+msgid ""
+"Priority: important can only operate for all sections listed in the "
+"C<bootstrap> option. This may cause some confusion when mixing suites."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:537
+msgid ""
+"It is not possible to enable addimportant and omitrequired in the same "
+"configuration. C<multistrap> will exit with error code 7 if any "
+"configuration results in addimportant and omitrequired both being set to "
+"true. (This includes the effects of including other configuration files.)"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:543
+msgid "Recommends behaviour"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:545
+msgid ""
+"The Debian default behaviour after the Lenny release was to consider "
+"recommended packages as extra packages to be installed when any one package "
+"is selected. Recommended packages are those which the maintainer considers "
+"that would be present on C<most> installations of that package and allowing "
+"Recommends means allowing Recommends of recommended packages and so on."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:552
+msgid "The multistrap default is to turn recommends OFF."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:554
+msgid ""
+"Set the allowrecommends option to true in the General section to use typical "
+"Debian behaviour."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:557
+msgid "Default release"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:559
+msgid ""
+"C<multistrap> supports an option to explicitly set the default release to "
+"use with apt: C<aptdefaultrelease>. This determines which release apt will "
+"use for the base system packages and is not the same as pinning (which "
+"relates to the use of apt after installation). Multistrap sets the "
+"default-release to the wildcard * unless a release is named in the "
+"C<aptdefaultrelease> field. Any release specified here must also be defined "
+"in a stanza referenced in the bootstrap list or apt will fail."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:567
+msgid ""
+"To install a specific version of a package from a newer release than the one "
+"specified as default, C<explicitsuite> must also be set to true if the "
+"package exists at any version in the default release. Also, any packages "
+"upon which that package has a strict dependency (i.e. = rather than >=) must "
+"also be explicitly added to the packages line in the stanza for the desired "
+"version, even though that package does not need to be listed to get it from "
+"the default release. This is typical apt behaviour and is not a bug in "
+"multistrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:576
+msgid ""
+"The combination of default release, explicit suite and apt preferences can "
+"quickly become complex and bugs can be very hard to identify.  C<multistrap> "
+"always outputs the complete apt command line, so test this command yourself "
+"(using the files written out by C<multistrap>) to see what is going "
+"on. Remember that all dependency resolution and all the logic to determine "
+"which version of a specific package gets installed in your C<multistrap> "
+"chroot is entirely down to apt and all C<multistrap> can do is pass files "
+"and command line options to apt."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:585
+msgid "See also: apt preferences."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:587
+msgid "Explicit suite specification"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:589
+msgid ""
+"Sometimes, apt needs to be told to get a particular package from a "
+"particular suite, ignoring a more recent version in another suite in the "
+"same set of sources."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:593
+msgid ""
+"C<multistrap> can operate with and without the explicit suite option, the "
+"default is to let apt use the most recent version from the collection of "
+"specified F<bootstrap> sources."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:597
+msgid ""
+"Explicit suite specification has no effect on the final installed system - "
+"if your aptsources includes a repository which in turn includes a newer "
+"version of the package(s) specified explicitly, the next C<apt-get upgrade> "
+"on the device will bring in the newer version."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:602
+msgid ""
+"Also, when specifying packages to get from a specific suite, apt will also "
+"try and ensure that the dependencies for that package are also from the same "
+"suite and this can cause apt to be unable to resolve the complete set of "
+"dependencies. In this situation, being explicit about one package selection "
+"may require being explicit about some (not necessarily all) of the "
+"dependencies of that package as well."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:609
+msgid ""
+"When using this support in Lenny, ensure that each section uses the suite "
+"(oldstable, stable, testing, sid) and B<not> the codename (etch, lenny, "
+"squeeze, sid) in the C<suite> configuration item as the version of apt in "
+"Lenny and previous cannot use the codename."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:614
+msgid "To test, on Lenny, try:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:616
+#, no-wrap
+msgid ""
+" $ sudo apt-get install apt/stable\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:618
+msgid "Compare with"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:620
+#, no-wrap
+msgid ""
+" $ sudo apt-get install apt/lenny\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:622
+msgid ""
+"When using explicitsuite, take care in using stable-proposed-updates or "
+"other temporary locations - if the package migrates into another suite and "
+"is removed from the temporary suite (as with *-proposed-updates), multistrap "
+"will not be able to find the package."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:628
+msgid ""
+"Explicit suite handling can be very hard to get right. In general, it is "
+"best to create a small bootstrap chroot of your native arch, then chroot "
+"into it, add the relevant apt sources and work out exactly what commands are "
+"necessary to get the correct mix of packages. Avoid specifying explicit "
+"versions to sort out problems, work with suites only. Apt preferences / "
+"pinning may be useful here, see Apt preferences."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:635
+msgid "Apt preferences"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:637
+msgid ""
+"If a suitable file is listed in the B<aptpreferences> option of the "
+"B<General> section of the configuration file, this file will be copied into "
+"the apt preferences directory of the bootstrap before apt is first used."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:642
+msgid ""
+"When an apt preferences file B<is> provided, the C<Default-Release> "
+"behaviour of C<multistrap> is disabled."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:645
+msgid ""
+"As with other external scripts and files, the content of the apt preferences "
+"file is beyond the scope of this manpage. C<multistrap> does not try to "
+"verify the supplied file other than ensuring that it can be read."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:650
+msgid "Omitting deb-src listings"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:652
+msgid ""
+"Some multistrap environments do not need access to the Debian sources of "
+"packages being installed, typically this is required when preparing a build "
+"(or cross-build) chroot using multistrap."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:656
+msgid ""
+"To turn off this additional source (and save both download time and "
+"apt-cache size), use the omitdebsrc field in each Section."
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:659
+#, no-wrap
+msgid ""
+" [Baked]\n"
+" packages=\n"
+" source=http://www.emdebian.org/baked\n"
+" keyring=emdebian-archive-keyring\n"
+" suite=testing\n"
+" omitdebsrc=true\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:666
+msgid ""
+"omitdebsrc is necessary when using packages from debian-ports where packages "
+"do not have sources, except \"unreleased\"."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:669
+msgid "fakeroot"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:671
+msgid ""
+"Foreign architecture bootstraps can operate under C<fakeroot> (C<multistrap> "
+"is designed to do as much as it can within a single call to make this "
+"easier) but the configuration stage which normally happens with a native "
+"architecture bootstrap requires C<chroot> and C<chroot> itself will not "
+"operate under C<fakeroot>."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:677
+msgid ""
+"Therefore, if C<multistrap> detects that C<fakeroot> is in use, native mode "
+"configuration is skipped with a reminder warning."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:680
+msgid ""
+"The same problem applies to C<apt-get install> and therefore the "
+"installation of the keyring package on the host system is also skipped if "
+"fakeroot is detected."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:684
+msgid "Handling problematic packages"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:686
+msgid ""
+"Sometimes, a particular package will fail to even unpack properly if other "
+"packages have not already been unpacked. This can happen if dpkg diversions "
+"are not setup correctly or if the package Pre-Depends on an executable in "
+"another package."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:691
+msgid ""
+"Multistrap offers two ways to handle these problems. A package can be listed "
+"as C<reinstall> or as C<additional>. Each section in the C<multistrap> "
+"configuration file can have a single C<reinstall> or C<additional> listing "
+"or both."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:696
+msgid ""
+"Reinstall means that the package will be downloaded and unpacked as normal - "
+"alongside all the other packages, but will then be reinstalled at the end by "
+"running the C<preinst> maintainer script with the C<upgrade> "
+"argument. C<dpkg> will then continue the rest of the configuration of that "
+"package."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:702
+msgid ""
+"Additional adds a second round of C<apt-get install> to the multistrap "
+"process - after the initial unpacking. The additional package will then be "
+"downloaded and unpacked. If running natively, the additional package is "
+"downloaded, unpacked and configured after all the rest of the packages have "
+"been downloaded, unpacked and configured."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:708
+msgid ""
+"Neither C<reinstall> nor C<additional> should be seen as more than just "
+"workarounds and wishlist bugs should be filed in Debian against packages "
+"which require the use of these mechanisms (or the packages which would "
+"prevent the particular package from operating normally)."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:713
+msgid "Debconf preseeding"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:715
+msgid ""
+"Adding a debconf seed can help in configuring packages to a particular "
+"setting instead of the package default when running the configuration "
+"non-interactively. See http://www.debian-administration.org/articles/394 for "
+"information on how to create seed files."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:720
+msgid ""
+"Multiple seed files can be specified using the debconfseed field in the "
+"[General] section, separated by spaces:"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:723
+#, no-wrap
+msgid ""
+" debconfseed=seed1 seed2\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:725
+msgid ""
+"Files which do not exist or which cannot be opened will be silently "
+"ignored. Check the results of the parsing using the C<--simulate> option to "
+"C<multistrap>. The preseeding files will be copied to a preseed directory in "
+"/tmp inside the rootfs."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:730
+msgid ""
+"To use the preseeding, add a section to the configscript.sh, prior to any "
+"calls to B<dpkg --configure -a>. e.g. :"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:737
+#, no-wrap
+msgid ""
+" export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true\n"
+" export LC_ALL=C LANGUAGE=C LANG=C\n"
+" if [ -d /tmp/preseeds/ ]; then\n"
+"    for file in `ls -1 /tmp/preseeds/*`; do\n"
+"    debconf-set-selections $file\n"
+"    done\n"
+" fi\n"
+" dpkg --configure -a\n"
+"\n"
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:746
+msgid "Hooks"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:748
+msgid ""
+"If a hook directory (hookdir=) is specified in the General section of the "
+"C<multistrap> configuration file, the hook scripts which are executable will "
+"be run from outside the multistrap directory at the following stages:"
+msgstr ""
+
+#. type: =item
+#: pod/multistrap:754
+msgid "download hooks"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:756
+msgid ""
+"Executed before unpacking is started, immediately after the packages have "
+"been downloaded. Download hooks are executable scripts in the specified hook "
+"directory with a filename beginning with B<download>."
+msgstr ""
+
+#. type: =item
+#: pod/multistrap:760
+msgid "native hooks"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:762
+msgid ""
+"Native hook scripts are executed only in native mode, immediately before "
+"starting the configuration of the downloaded packages and again upon "
+"completion of the package configuration. Native hooks will be called the "
+"absolute path and the current progress state, start or end."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:767
+msgid ""
+"Native scripts are executable scripts in the specified hook directory with a "
+"filename beginning with B<native>."
+msgstr ""
+
+#. type: =item
+#: pod/multistrap:770
+msgid "completion hooks"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:772
+msgid ""
+"Executed immediately before the tarball is created or C<multistrap> exits if "
+"not configured to create a tarball."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:775
+msgid ""
+"Completion scripts are executable scripts in the specified hook directory "
+"with a filename beginning with B<completion>."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:780
+msgid ""
+"Hooks are passed the absolute path to the directory which will be the top "
+"level directory of the chroot or multistrap system. Hooks which cannot be "
+"resolved using realpath or which are not executable will be ignored."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:785
+msgid "All hooks of one type are sorted into alphabetical order before being run."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:788
+msgid ""
+"Note that C<multistrap> does not rollback the effects of hooks in the case "
+"of errors. However, C<multistrap> will report the accumulated errors as "
+"warnings. If a hook exits non-zero, the exit value is converted to a "
+"positive number and added to the total warning count, reported at the end of "
+"the operation."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:794
+msgid "Output"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:796
+msgid ""
+"C<multistrap> can produce a lot of output - informational messages appear on "
+"STDOUT, errors and warnings on STDERR. Calls to C<apt> and C<dpkg> respect "
+"the same pattern, so it is simple to trim the combined C<multistrap> output "
+"to just the errors, if desired."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:801
+msgid ""
+"C<multistrap> accumulates error states from non-fatal processes within the "
+"operation and reports these as warnings on STDERR as well as exiting with "
+"the accumulated error count. This includes hooks which report non-zero exit "
+"values."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:806
+msgid "Bugs"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:808
+msgid ""
+"As C<multistrap> gets more complex, bugs will creep into the package.  "
+"Please report all bugs to the Debian BTS using the C<reportbug> tool and "
+"B<please> attach all configuration files. If your configuration needs to "
+"access local or private apt repositories, please check your configuration "
+"with the latest version of C<multistrap> in Debian using the C<--simulate> "
+"option and include that report in your bug report."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:815
+msgid ""
+"The C<--simulate> option output is regularly expanded to help users debug "
+"problems in the configuration files."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:818
+msgid ""
+"Please also check (and update) the Multistrap wiki at "
+"http://wiki.debian.org/Multistrap and the Multistrap webpage content at "
+"http://www.emdebian.org/multistrap/ before filing bugs. Various people on "
+"the debian-embedded@lists.debian.org mailing list and #emdebian IRC channel "
+"on irc.oftc.net can also help if your config file does not parse "
+"correctly. You would need to put the C<--simulate> output on a pastebin "
+"website and put the URL in your message."
+msgstr ""
+
+#. type: =head1
+#: pod/multistrap:826
+msgid "MultiArch support"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:828
+msgid ""
+"Multiarch support is experimental - please report issues and file bugs with "
+"full details of your setup, the full multistrap config file and the errors "
+"reported."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:832
+msgid ""
+"C<multistrap> overrides the existing multiarch support of the external "
+"system so that a MultiArch aware system can still create a non-MultiArch "
+"chroot from repositories which do not support all of the architectures "
+"supported by the external dpkg."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:837
+msgid ""
+"If multiarch is enabled within the multistrap chroot, C<multistrap> writes "
+"out the list into F</var/lib/dpkg/arch> inside the chroot."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:840
+msgid ""
+"For multiple architectures, specify the option once and use a space "
+"separated list for the architecture list. Ensure you include what will be "
+"the host architecture of the chroot."
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:844
+msgid "See also http://wiki.debian.org/Multiarch/"
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:846
+#, no-wrap
+msgid ""
+" [General]\n"
+" ...\n"
+" multiarch=i386 armel armhf\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:850
+msgid ""
+"Each Section will install packages from the base architecture unless the "
+"C<Architecture> option is specified for particular sections."
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:853
+#, no-wrap
+msgid ""
+" [Foreign]\n"
+" packages=libgcc1 libc6\n"
+" architecture=armel\n"
+" source=http://ftp.uk.debian.org/debian\n"
+" keyring=debian-archive-keyring\n"
+" suite=sid\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: pod/multistrap:860
+msgid ""
+"In the C<--simulate> output, the architecture(s) specified in the MultiArch "
+"option will be listed under the \"Foreign architectures\" listing. Packages "
+"for a specific architecture will be listed as the package name followed by a "
+"colon followed by the architecture."
+msgstr ""
+
+#. type: verbatim
+#: pod/multistrap:865
+#, no-wrap
+msgid ""
+" libgcc1:armel libc6:armel\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:167
+msgid "device-table.pl - parses simple device tables and passes to mknod"
+msgstr ""
+
+#. type: verbatim
+#: device-table.pl:171
+#, no-wrap
+msgid ""
+" device-table.pl [-n|--dry-run] [-d DIR] [-f FILE]\n"
+" device-table.pl -?|-h|--help|--version\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:176
+msgid ""
+"By default, F<device-table.pl> writes out the device nodes in the current "
+"working directory. Use the directory option to write out elsewhere."
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:179
+msgid ""
+"multistrap contains a default device-table file, use the file option to "
+"override the default F</usr/share/doc/multistrap/examples/device_table.txt>"
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:182
+msgid "Use the dry-run option to see the commands that would be run."
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:184
+msgid ""
+"Device nodes need fakeroot or another way to use root access. If "
+"F<device-table.pl> is already being run under fakeroot or equivalent, the "
+"existing fakeroot session will be used, alternatively, use the no-fakeroot "
+"option to drop the internal fakeroot usage."
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:189
+msgid ""
+"Note that fakeroot does not support changing the actual ownerships, for "
+"that, run the final packing into a tarball under fakeroot as well, or use "
+"C<sudo> when running F<device-table.pl>"
+msgstr ""
+
+#. type: =head1
+#: device-table.pl:193
+msgid "Device table format"
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:195
+msgid ""
+"Device table files are tab separated value files (TSV). All lines in the "
+"device table must have exactly 10 entries, each separated by a single tab, "
+"except comments - which must start with #"
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:199
+msgid "Device table entries take the form of:"
+msgstr ""
+
+#. type: verbatim
+#: device-table.pl:201
+#, no-wrap
+msgid ""
+" <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:203
+msgid "where name is the file name, type can be one of:"
+msgstr ""
+
+#. type: verbatim
+#: device-table.pl:205
+#, no-wrap
+msgid ""
+" f A regular file\n"
+" d Directory\n"
+" s symlink\n"
+" h hardlink\n"
+" c Character special device file\n"
+" b Block special device file\n"
+" p Fifo (named pipe)\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:213
+msgid ""
+"symlinks and hardlinks are extensions to the device table, just for "
+"F<device-table.pl>, other device table parsers might not handle these "
+"types. The first field of the symlink command is the existing target of the "
+"symlink, the third field is the full path of the symlink itself.  e.g."
+msgstr ""
+
+#. type: verbatim
+#: device-table.pl:219
+#, no-wrap
+msgid ""
+" /proc/self/fd/0 s /dev/stdin - - - - - - -\n"
+"\n"
+msgstr ""
+
+#. type: textblock
+#: device-table.pl:221
+msgid "See http://wiki.debian.org/DeviceTableScripting"
+msgstr ""
diff --git a/doc/po4a.config b/doc/po4a.config
new file mode 100644
index 0000000..2f240bf
--- /dev/null
+++ b/doc/po4a.config
@@ -0,0 +1,4 @@
+[po4a_langs] da de fr pt
+[po4a_paths] doc/po/multistrap.pot $lang:doc/po/$lang.po
+[type:pod] pod/multistrap $lang:doc/pod/1/$lang/multistrap
+[type:pod] device-table.pl $lang:doc/pod/1/$lang/device-table.pl
diff --git a/po/multistrap.pot b/po/multistrap.pot
new file mode 100644
index 0000000..150e0a5
--- /dev/null
+++ b/po/multistrap.pot
@@ -0,0 +1,743 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: multistrap@packages.debian.org\n"
+"POT-Creation-Date: 2013-08-11 14:22+0100\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
+
+#: ../multistrap:78
+msgid "Unknown option"
+msgstr ""
+
+#: ../multistrap:87
+#, perl-format
+msgid "Need a configuration file - use %s -f\n"
+msgstr ""
+
+#. Translators: fields are programname, version string, include file.
+#. Translators: fields are: programname, versionstring, configfile.
+#: ../multistrap:100 ../multistrap:128
+#, perl-format
+msgid "%s %s using %s\n"
+msgstr ""
+
+#: ../multistrap:107
+msgid ""
+"Error: Cannot set 'add Priority: important' when packages of 'Priority: "
+"required' are being omitted.\n"
+msgstr ""
+
+#: ../multistrap:110
+msgid "Please also check the included configuration file:"
+msgid_plural "Please also check the included configuration files:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:131 ../multistrap:133
+#, perl-format
+msgid "Defaulting architecture to native: %s\n"
+msgstr ""
+
+#: ../multistrap:135
+#, perl-format
+msgid "Using foreign architecture: %s\n"
+msgstr ""
+
+#: ../multistrap:143
+#, perl-format
+msgid ""
+"No sources defined for a foreign multistrap.\n"
+"\tUsing your existing apt sources. To use different sources,\n"
+"\tlist them with aptsources= in '%s'."
+msgstr ""
+
+#. Translators: fields are: programname, architecture, host architecture.
+#: ../multistrap:153
+#, perl-format
+msgid "%s building %s multistrap on '%s'\n"
+msgstr ""
+
+#: ../multistrap:155
+msgid "No directory specified!"
+msgstr ""
+
+#: ../multistrap:248 ../multistrap:253 ../multistrap:445 ../multistrap:450
+msgid "Cannot open sources list"
+msgstr ""
+
+#: ../multistrap:295
+#, perl-format
+msgid "I: Installing %s\n"
+msgstr ""
+
+#: ../multistrap:303
+#, perl-format
+msgid "Unable to download keyring package: '%s'"
+msgstr ""
+
+#: ../multistrap:321 ../multistrap:329
+msgid "Secure Apt handling failed - try without authentication."
+msgstr ""
+
+#: ../multistrap:354
+#, perl-format
+msgid "Getting package lists: apt-get %s update\n"
+msgstr ""
+
+#: ../multistrap:357
+#, perl-format
+msgid "apt update failed. Exit value: %d\n"
+msgstr ""
+
+#: ../multistrap:362
+msgid "I: Calculating required packages.\n"
+msgstr ""
+
+#: ../multistrap:367
+#, perl-format
+msgid "I: Adding 'Priority: important': %s\n"
+msgstr ""
+
+#: ../multistrap:404
+#, perl-format
+msgid "apt download failed. Exit value: %d\n"
+msgstr ""
+
+#: ../multistrap:414
+#, perl-format
+msgid "setupscript '%s' returned %d.\n"
+msgstr ""
+
+#: ../multistrap:422
+msgid "Native mode configuration reported an error!\n"
+msgstr ""
+
+#: ../multistrap:435
+msgid "Cannot read apt sources list directory.\n"
+msgstr ""
+
+#: ../multistrap:477
+#, perl-format
+msgid ""
+"\n"
+"Multistrap system installed successfully in %s.\n"
+msgstr ""
+
+#: ../multistrap:479
+#, perl-format
+msgid ""
+"\n"
+"Multistrap system reported %d error in %s.\n"
+msgid_plural ""
+"\n"
+"Multistrap system reported %d errors in %s.\n"
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:485
+#, perl-format
+msgid ""
+"\n"
+"Compressing multistrap system in '%s' to a tarball called: '%s'.\n"
+msgstr ""
+
+#: ../multistrap:491
+#, perl-format
+msgid ""
+"\n"
+"Removing build directory: '%s'\n"
+msgstr ""
+
+#: ../multistrap:496
+#, perl-format
+msgid ""
+"\n"
+"Multistrap system packaged successfully as '%s'.\n"
+msgstr ""
+
+#: ../multistrap:498
+#, perl-format
+msgid ""
+"\n"
+"Multistrap system packaged as '%s' with warnings.\n"
+msgstr ""
+
+#: ../multistrap:528
+msgid "Marking automatically installed packages... please wait\n"
+msgstr ""
+
+#: ../multistrap:530 ../multistrap:549 ../multistrap:590 ../multistrap:845
+#: ../multistrap:904
+msgid "Cannot read apt archives directory.\n"
+msgstr ""
+
+#: ../multistrap:538
+#, perl-format
+msgid "Found %d package to mark.\n"
+msgid_plural "Found %d packages to mark.\n"
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:541
+msgid "Marking automatically installed packages completed.\n"
+msgstr ""
+
+#: ../multistrap:562
+msgid "I: Calculating obsolete packages\n"
+msgstr ""
+
+#: ../multistrap:576 ../multistrap:580
+#, perl-format
+msgid "I: Removing %s\n"
+msgstr ""
+
+#: ../multistrap:597
+#, perl-format
+msgid "Using directory %s for unpacking operations\n"
+msgstr ""
+
+#: ../multistrap:599
+#, perl-format
+msgid "I: Extracting %s...\n"
+msgstr ""
+
+#. Translators: imagine "Architecture: all" in quotes.
+#: ../multistrap:617
+#, perl-format
+msgid ""
+"Warning: invalid value '%s' for Multi-Arch field in Architecture: all "
+"package: %s. "
+msgstr ""
+
+#. Translators: Please do not translate 'same', 'foreign' or 'allowed'
+#: ../multistrap:623
+#, perl-format
+msgid ""
+"Warning: unrecognised value '%s' for Multi-Arch field in %s. (Expecting "
+"'same', 'foreign' or 'allowed'.)"
+msgstr ""
+
+#: ../multistrap:638
+#, perl-format
+msgid ""
+"dpkg -X failed with error code %s\n"
+"Skipping...\n"
+msgstr ""
+
+#: ../multistrap:674
+#, perl-format
+msgid " -> Processing conffiles for %s\n"
+msgstr ""
+
+#: ../multistrap:695
+msgid "I: Unpacking complete.\n"
+msgstr ""
+
+#: ../multistrap:702
+#, perl-format
+msgid "I: Copying debconf preseed data to %s.\n"
+msgstr ""
+
+#. Translators: the plural is followed by a single repeat for each
+#: ../multistrap:714
+#, perl-format
+msgid "I: Running %d post-download hook\n"
+msgid_plural "I: Running %d post-download hooks\n"
+msgstr[0] ""
+msgstr[1] ""
+
+#. Translators: this is a single instance, naming the hook
+#: ../multistrap:718
+#, perl-format
+msgid "I: Running post-download hook: '%s'\n"
+msgstr ""
+
+#: ../multistrap:722
+#, perl-format
+msgid "I: post-download hook '%s' reported an error: %d\n"
+msgstr ""
+
+#. Translators: the plural is followed by a single repeat for each
+#: ../multistrap:732
+#, perl-format
+msgid "I: Starting %d native hook\n"
+msgid_plural "I: Starting %d native hooks\n"
+msgstr[0] ""
+msgstr[1] ""
+
+#. Translators: this is a single instance, naming the hook
+#: ../multistrap:736
+#, perl-format
+msgid "I: Starting native hook: '%s'\n"
+msgstr ""
+
+#: ../multistrap:740
+#, perl-format
+msgid "I: run-native hook start '%s' reported an error: %d\n"
+msgstr ""
+
+#. Translators: the plural is followed by a single repeat for each
+#: ../multistrap:750
+#, perl-format
+msgid "I: Stopping %d native hook\n"
+msgid_plural "I: Stopping %d native hooks\n"
+msgstr[0] ""
+msgstr[1] ""
+
+#. Translators: this is a single instance, naming the hook
+#: ../multistrap:754
+#, perl-format
+msgid "I: Stopping native hook: '%s'\n"
+msgstr ""
+
+#: ../multistrap:758
+#, perl-format
+msgid "I: run-native hook end '%s' reported an error: %d\n"
+msgstr ""
+
+#. Translators: the plural is followed by a single repeat for each
+#: ../multistrap:768
+#, perl-format
+msgid "I: Running %d post-configuration hook\n"
+msgid_plural "I: Running %d post-configuration hooks\n"
+msgstr[0] ""
+msgstr[1] ""
+
+#. Translators: this is a single instance, naming the hook
+#: ../multistrap:772
+#, perl-format
+msgid "I: Running post-configuration hook: '%s'\n"
+msgstr ""
+
+#: ../multistrap:776
+#, perl-format
+msgid "I: run-completion hook '%s' reported an error: %d\n"
+msgstr ""
+
+#: ../multistrap:793
+#, perl-format
+msgid "I: Unlinking unsafe %slib64 -> /lib symbolic link.\n"
+msgstr ""
+
+#: ../multistrap:799
+#, perl-format
+msgid "I: Replaced ./lib64 -> /lib symbolic link with new %slib64 directory.\n"
+msgstr ""
+
+#: ../multistrap:802
+#, perl-format
+msgid "I: Setting %slib64 -> %slib symbolic link.\n"
+msgstr ""
+
+#: ../multistrap:820
+msgid "I: ./bin/sh symbolic link does not exist.\n"
+msgstr ""
+
+#: ../multistrap:822
+msgid "I: Setting ./bin/sh -> ./bin/dash\n"
+msgstr ""
+
+#: ../multistrap:827
+msgid "I: ./bin/dash not found. Setting ./bin/sh -> ./bin/bash\n"
+msgstr ""
+
+#: ../multistrap:834
+#, perl-format
+msgid "I: Shell found OK in %s:\n"
+msgstr ""
+
+#: ../multistrap:901
+msgid "I: Tidying up apt cache and list data.\n"
+msgstr ""
+
+#: ../multistrap:921
+msgid "Cannot read apt lists directory.\n"
+msgstr ""
+
+#: ../multistrap:929
+msgid "Cannot read apt cache directory.\n"
+msgstr ""
+
+#: ../multistrap:944
+#, perl-format
+msgid ""
+"I: dpkg configuration settings:\n"
+"\t%s\n"
+msgstr ""
+
+#: ../multistrap:946
+msgid ""
+"W: Cannot use 'chroot' when fakeroot is in use. Skipping package "
+"configuration.\n"
+msgstr ""
+
+#: ../multistrap:949
+msgid "I: Native mode - configuring unpacked packages . . .\n"
+msgstr ""
+
+#: ../multistrap:962
+#, perl-format
+msgid "I: Running debconf for seed file: %s\n"
+msgstr ""
+
+#: ../multistrap:971
+msgid "I: Running preinst scripts with 'install' argument.\n"
+msgstr ""
+
+#: ../multistrap:985
+msgid "ERR: dpkg configure reported an error.\n"
+msgstr ""
+
+#: ../multistrap:1003
+#, perl-format
+msgid "Cannot open %s directory. %s\n"
+msgstr ""
+
+#: ../multistrap:1037
+#, perl-format
+msgid "cannot open apt sources list. %s"
+msgstr ""
+
+#: ../multistrap:1043
+#, perl-format
+msgid "cannot open apt sources.list directory %s\n"
+msgstr ""
+
+#: ../multistrap:1048
+#, perl-format
+msgid "cannot open /etc/apt/sources.list.d/%s %s"
+msgstr ""
+
+#: ../multistrap:1060
+#, perl-format
+msgid ""
+"\n"
+"%s version %s\n"
+"\n"
+"Usage:\n"
+" %s [-a ARCH] [-d DIR] -f CONFIG_FILE\n"
+" %s -?|-h|--help|--version\n"
+"\n"
+"Command:\n"
+" -f|--file CONFIG_FILE:  path to the multistrap configuration file.\n"
+"\n"
+"Options:\n"
+" -a|--arch ARCHITECTURE: override the configuration file architecture.\n"
+" -d|--dir PATH:          override the configuration file directory.\n"
+"    --no-auth:           do not use Secure Apt for any repositories\n"
+"    --tidy-up:           remove apt cache data and downloaded archives.\n"
+"    --dry-run:           output the configuration and exit\n"
+"    --simulate:          output the configuration and exit\n"
+" -?|-h|--help:           print this usage message and exit\n"
+" --version:              print this usage message and exit\n"
+"\n"
+"%s replaces debootstrap to provide support for multiple\n"
+"repositories, using a configuration file to specify the relevant suites,\n"
+"architecture, extra packages and the mirror to use for each repository.\n"
+"\n"
+"Example configuration:\n"
+"[General]\n"
+"arch=armel\n"
+"directory=/opt/multistrap/\n"
+"# same as --tidy-up option if set to true\n"
+"cleanup=true\n"
+"# same as --no-auth option if set to true\n"
+"# keyring packages listed in each bootstrap will\n"
+"# still be installed.\n"
+"noauth=false\n"
+"# extract all downloaded archives (default is true)\n"
+"unpack=true\n"
+"# enable MultiArch for the specified architectures\n"
+"# default is empty\n"
+"multiarch=\n"
+"# aptsources is a list of sections to be used for downloading packages\n"
+"# and lists and placed in the /etc/apt/sources.list.d/multistrap.sources."
+"list\n"
+"# of the target. Order is not important\n"
+"aptsources=Debian\n"
+"# the order of sections is not important.\n"
+"# the bootstrap option determines which repository\n"
+"# is used to calculate the list of Priority: required packages.\n"
+"bootstrap=Debian\n"
+"\n"
+"[Debian]\n"
+"packages=\n"
+"source=http://cdn.debian.net/debian\n"
+"keyring=debian-archive-keyring\n"
+"suite=stable\n"
+"\n"
+"This will result in a completely normal bootstrap of Debian stable from\n"
+"the specified mirror, for armel in /opt/multistrap/.\n"
+"\n"
+"'Architecture' and 'directory' can be overridden on the command line.\n"
+"\n"
+"Specify a package to extend the bootstap to include that package and\n"
+"all dependencies. Dependencies will be calculated by apt so as to use\n"
+"only the most recent suitable version from all configured repositories.\n"
+"\n"
+"General settings:\n"
+"\n"
+"'directory' specifies the top level directory where the bootstrap\n"
+"will be created - it is not packed into a .tgz once complete.\n"
+"\n"
+msgstr ""
+
+#: ../multistrap:1129
+msgid "failed to write usage:"
+msgstr ""
+
+#: ../multistrap:1138
+#, perl-format
+msgid "Failed to parse '%s'!\n"
+msgstr ""
+
+#: ../multistrap:1165
+#, perl-format
+msgid "INF: '%s' exists but is not executable - ignoring.\n"
+msgstr ""
+
+#: ../multistrap:1242
+#, perl-format
+msgid "ERR: Cannot find include file: '%s' for '%s'"
+msgstr ""
+
+#: ../multistrap:1270
+#, perl-format
+msgid ""
+"ERR: Unsupportable option: 'architecture'. Current dpkg version does not "
+"support MultiArch. Packages for '%s' have been ignored.\n"
+msgstr ""
+
+#. Translators: %1 and %2 are the same value here - the erroneous architecture name
+#: ../multistrap:1304
+#, perl-format
+msgid ""
+"ERR: Misconfiguration in: 'architecture' option. Packages of architecture=%s "
+"requested but '%s' is not included in the multiarch="
+msgstr ""
+
+#: ../multistrap:1328
+#, perl-format
+msgid "ERR: system call failed: '%s' %s"
+msgstr ""
+
+#: ../multistrap:1337
+#, perl-format
+msgid "Unable to create directory '%s'"
+msgstr ""
+
+#: ../multistrap:1357
+#, perl-format
+msgid "The supplied configuration file '%s' cannot be parsed correctly."
+msgstr ""
+
+#: ../multistrap:1368
+#, perl-format
+msgid "ERR: The '%s' section is not defined.\n"
+msgstr ""
+
+#: ../multistrap:1372
+msgid "Including configuration file from:"
+msgid_plural "Including configuration files from:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:1376
+msgid "No included configuration files.\n"
+msgstr ""
+
+#: ../multistrap:1392
+msgid "Not listed as a 'Bootstrap' section."
+msgstr ""
+
+#: ../multistrap:1399
+msgid "Section to install"
+msgid_plural "Sections to install"
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:1401
+msgid "Section for updates"
+msgid_plural "Sections for updates"
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:1408
+msgid "Omit deb-src from sources.list for sections:"
+msgstr ""
+
+#: ../multistrap:1410
+msgid "None."
+msgstr ""
+
+#: ../multistrap:1418
+msgid "Explicit suite selection: Yes\n"
+msgstr ""
+
+#: ../multistrap:1420
+msgid "Explicit suite selection: No - let apt use latest.\n"
+msgstr ""
+
+#: ../multistrap:1423
+msgid "Recommended packages are added to the selection.\n"
+msgstr ""
+
+#: ../multistrap:1425
+msgid "Recommended packages are ignored.\n"
+msgstr ""
+
+#: ../multistrap:1431
+msgid "Marking dependency packages as auto-installed.\n"
+msgstr ""
+
+#: ../multistrap:1433
+msgid "Debconf preseed file"
+msgid_plural "Debconf preseed files"
+msgstr[0] ""
+msgstr[1] ""
+
+#. Translators: leaving the plural blank to keep the lines shorter.
+#: ../multistrap:1437
+msgid "Download hook: "
+msgid_plural ""
+msgstr[0] ""
+msgstr[1] ""
+
+#. Translators: leaving the plural blank to keep the lines shorter.
+#: ../multistrap:1442
+msgid "Native hook: "
+msgid_plural ""
+msgstr[0] ""
+msgstr[1] ""
+
+#. Translators: leaving the plural blank to keep the lines shorter.
+#: ../multistrap:1447
+msgid "Completion hook: "
+msgid_plural ""
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:1450
+msgid "Extra Package: "
+msgid_plural "Extra Packages: "
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:1454
+#, perl-format
+msgid "Architecture to download: %s\n"
+msgstr ""
+
+#: ../multistrap:1456
+#, perl-format
+msgid "Cannot determine architecture from '%s'. Using %s.\n"
+msgstr ""
+
+#: ../multistrap:1459
+msgid "Currently installed dpkg does not support MultiArch."
+msgstr ""
+
+#: ../multistrap:1461
+msgid "Foreign architecture"
+msgid_plural "Foreign architectures"
+msgstr[0] ""
+msgstr[1] ""
+
+#: ../multistrap:1465
+#, perl-format
+msgid "Output directory: '%s'\n"
+msgstr ""
+
+#: ../multistrap:1467
+#, perl-format
+msgid "Cannot determine directory from '%s'.\n"
+msgstr ""
+
+#: ../multistrap:1470 ../multistrap:1472
+#, perl-format
+msgid "extract all downloaded archives: %s\n"
+msgstr ""
+
+#: ../multistrap:1475
+msgid "Script to be run after unpacking"
+msgstr ""
+
+#: ../multistrap:1477
+msgid "'Priority required' packages are not included."
+msgstr ""
+
+#: ../multistrap:1479
+msgid "'Priority: required' packages are included."
+msgstr ""
+
+#: ../multistrap:1482
+msgid "'Priority: important' packages are included.\n"
+msgstr ""
+
+#: ../multistrap:1484
+msgid "'Priority: important' packages are ignored.\n"
+msgstr ""
+
+#: ../multistrap:1487
+msgid "remove apt cache data: true\n"
+msgstr ""
+
+#: ../multistrap:1489
+msgid "remove apt cache data: false\n"
+msgstr ""
+
+#: ../multistrap:1492
+msgid "allow the use of unauthenticated repositories: true\n"
+msgstr ""
+
+#: ../multistrap:1494
+msgid "allow the use of unauthenticated repositories: false\n"
+msgstr ""
+
+#: ../multistrap:1497
+#, perl-format
+msgid "Sources will be retained in: %s\n"
+msgstr ""
+
+#: ../multistrap:1500
+#, perl-format
+msgid "Tarball name: '%s'\n"
+msgstr ""
+
+#: ../multistrap:1504 ../multistrap:1510
+msgid "Preinst scripts are not executed.\n"
+msgstr ""
+
+#: ../multistrap:1506
+msgid "Preinst scripts are executed with the install argument.\n"
+msgstr ""
+
+#: ../multistrap:1508
+msgid "Packages will be configured.\n"
+msgstr ""
+
+#: ../multistrap:1511
+msgid "Packages will not be configured.\n"
+msgstr ""
+
+#: ../multistrap:1514
+#, perl-format
+msgid "Apt preferences file to use: '%s'\n"
+msgstr ""
+
+#: ../multistrap:1516
+msgid "No apt preferences file. Default release: *\n"
+msgstr ""