multistrap/doc/po/multistrap.pot

1849 lines
50 KiB
Text

# SOME DESCRIPTIVE TITLE
# Copyright (C) YEAR Free Software Foundation, Inc.
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2013-08-11 14:22+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"
#. type: =head1
#: pod/multistrap:3 device-table.pl:165
msgid "Name"
msgstr ""
#. type: textblock
#: pod/multistrap:5
msgid "multistrap - multiple repository bootstraps"
msgstr ""
#. type: =head1
#: pod/multistrap:7 device-table.pl:169
msgid "Synopsis"
msgstr ""
#. type: verbatim
#: pod/multistrap:9
#, no-wrap
msgid ""
" multistrap [-a ARCH] [-d DIR] -f CONFIG_FILE\n"
" multistrap [--simulate] -f CONFIG_FILE\n"
" multistrap -?|-h|--help|--version\n"
"\n"
msgstr ""
#. type: =head1
#: pod/multistrap:13 device-table.pl:174
msgid "Options"
msgstr ""
#. type: textblock
#: pod/multistrap:15
msgid "-?|-h|--help|--version - output the help text and exit successfully."
msgstr ""
#. type: textblock
#: pod/multistrap:17
msgid ""
"--dry-run - collate all the configuration settings and output a bare "
"summary."
msgstr ""
#. type: textblock
#: pod/multistrap:20
msgid "--simulate - same as --dry-run"
msgstr ""
#. type: textblock
#: pod/multistrap:22
msgid "(The following options can also be set in the configuration file.)"
msgstr ""
#. type: textblock
#: pod/multistrap:24
msgid "-a|--arch - architecture of the packages to put into the multistrap."
msgstr ""
#. type: textblock
#: pod/multistrap:26
msgid "-d|--dir - directory into which the bootstrap will be installed."
msgstr ""
#. type: textblock
#: pod/multistrap:28
msgid "-f|--file - configuration file for multistrap [required]"
msgstr ""
#. type: textblock
#: pod/multistrap:30
msgid "-s|--shortcut - shortened version of -f for files in known locations."
msgstr ""
#. type: textblock
#: pod/multistrap:32
msgid ""
"--tidy-up - remove apt cache data, downloaded Packages files and the apt "
"package cache. Same as cleanup=true."
msgstr ""
#. type: textblock
#: pod/multistrap:35
msgid ""
"--no-auth - allow the use of unauthenticated repositories. Same as "
"noauth=true"
msgstr ""
#. type: textblock
#: pod/multistrap:38
msgid ""
"--source-dir DIR - move the contents of var/cache/apt/archives/ from inside "
"the chroot to the specified external directory, then add the Debian source "
"packages for each used binary. Same as retainsources=DIR If the specified "
"directory does not exist, nothing is done. Requires --tidy-up in order to "
"calculate the full list of source packages, including dependencies."
msgstr ""
#. type: =head1
#: pod/multistrap:45
msgid "Description"
msgstr ""
#. type: textblock
#: pod/multistrap:47
msgid ""
"multistrap provides a debootstrap-like method based on apt and extended to "
"provide support for multiple repositories, using a configuration file to "
"specify the relevant suites, architecture, extra packages and the mirror to "
"use for each bootstrap."
msgstr ""
#. type: textblock
#: pod/multistrap:52
msgid ""
"The aim is to create a complete bootstrap / root filesystem with all "
"packages installed and configured, instead of just the base system."
msgstr ""
#. type: textblock
#: pod/multistrap:56
msgid ""
"In most cases, users will need to create a configuration file for each "
"different multistrap usage."
msgstr ""
#. type: textblock
#: pod/multistrap:59
msgid "Example configuration:"
msgstr ""
#. type: verbatim
#: pod/multistrap:61
#, no-wrap
msgid ""
" [General]\n"
" arch=armel\n"
" directory=/opt/multistrap/\n"
" # same as --tidy-up option if set to true\n"
" cleanup=true\n"
" # same as --no-auth option if set to true\n"
" # keyring packages listed in each bootstrap will\n"
" # still be installed.\n"
" noauth=false\n"
" # extract all downloaded archives (default is true)\n"
" unpack=true\n"
" # whether to add the /suite to be explicit about where apt\n"
" # needs to look for packages. Default is false.\n"
" explicitsuite=false\n"
" # enable MultiArch for the specified architectures\n"
" # default is empty\n"
" multiarch=\n"
" # aptsources is a list of sections to be used\n"
" # the /etc/apt/sources.list.d/multistrap.sources.list\n"
" # of the target. Order is not important\n"
" aptsources=Debian\n"
" # the bootstrap option determines which repository\n"
" # is used to calculate the list of Priority: required packages\n"
" # and which packages go into the rootfs.\n"
" # The order of sections is not important.\n"
" bootstrap=Debian\n"
" \n"
msgstr ""
#. type: verbatim
#: pod/multistrap:88 pod/multistrap:219
#, no-wrap
msgid ""
" [Debian]\n"
" packages=\n"
" source=http://ftp.uk.debian.org/debian\n"
" keyring=debian-archive-keyring\n"
" suite=lenny\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:94
msgid ""
"This will result in a completely normal bootstrap of Debian lenny from the "
"specified mirror, for armel in '/opt/multistrap/'. (This configuration is "
"retained in the package as F</usr/share/multistrap/lenny.conf>)"
msgstr ""
#. type: textblock
#: pod/multistrap:98
msgid ""
"Specify a package to extend the multistrap to include that package and all "
"dependencies of that package."
msgstr ""
#. type: textblock
#: pod/multistrap:101
msgid ""
"Specify more repositories for the bootstrap by adding new sections. Section "
"names need to be listed in the bootstrap general option for the packages to "
"be included in the bootstrap."
msgstr ""
#. type: textblock
#: pod/multistrap:105
msgid ""
"Specify which repositories will be available to the final system at boot by "
"listing the section names in the aptsources general option, e.g. to exclude "
"some internal sources or when using a local mirror when building the rootfs."
msgstr ""
#. type: textblock
#: pod/multistrap:110
msgid "Section names are case-insensitive."
msgstr ""
#. type: textblock
#: pod/multistrap:112
msgid ""
"All dependencies are resolved only by apt, using all bootstrap repositories, "
"to use only the most recent and most suitable dependencies. Note that "
"multistrap turns off Install-Recommends so if the multistrap needs a package "
"that is only a Recommended dependency, the recommended package needs to be "
"specified in the packages line explicitly. See C<Explicit suite "
"specification> for more information on getting specific packages from "
"specific suites."
msgstr ""
#. type: textblock
#: pod/multistrap:120
msgid ""
"'Architecture' and 'directory' can be overridden on the command line. Some "
"other general options also have command line options."
msgstr ""
#. type: =head1
#: pod/multistrap:123
msgid "Online examples and documentation"
msgstr ""
#. type: textblock
#: pod/multistrap:125
msgid ""
"C<multistrap> supports a range of permutations, see the wiki and the "
"emdebian website for more information and example configurations:"
msgstr ""
#. type: textblock
#: pod/multistrap:128
msgid "http://wiki.debian.org/Multistrap"
msgstr ""
#. type: textblock
#: pod/multistrap:130
msgid "http://www.emdebian.org/multistrap/"
msgstr ""
#. type: textblock
#: pod/multistrap:132
msgid ""
"C<multistrap> includes an example configuration file with a full list of all "
"supported config file options: "
"F</usr/share/doc/multistrap/examples/full.conf>"
msgstr ""
#. type: =head1
#: pod/multistrap:135
msgid "Shortcuts"
msgstr ""
#. type: textblock
#: pod/multistrap:137
msgid ""
"In a similar manner to C<debootstrap>, C<multistrap> supports referring to "
"configuration files in known locations by shortcuts. When using the "
"C<--shortcut> option, C<multistrap> will look for files in "
"F</usr/share/multistrap> and then F</etc/multistrap.d/>, appending a '.conf' "
"suffix to the specified shortcut."
msgstr ""
#. type: textblock
#: pod/multistrap:143
msgid "These two commands are equivalent:"
msgstr ""
#. type: verbatim
#: pod/multistrap:145
#, no-wrap
msgid ""
" $ sudo multistrap -s sid\n"
" $ sudo multistrap -f /usr/share/multistrap/sid.conf\n"
" \n"
msgstr ""
#. type: textblock
#: pod/multistrap:148
msgid ""
"Note that C<multistrap> will still fail if the configuration file itself "
"does not set the directory or the architecture."
msgstr ""
#. type: =head1
#: pod/multistrap:151
msgid "Repositories"
msgstr ""
#. type: textblock
#: pod/multistrap:153
msgid ""
"C<aptsources> lists the sections which should be used to create the "
"F</etc/apt/sources.list.d/multistrap.list> apt sources in the final "
"system. Not all C<aptsources> have to appear in the C<bootstrap> section if "
"you have some internal or local sources which are not accessible to the "
"installed root filesystem."
msgstr ""
#. type: textblock
#: pod/multistrap:159
msgid ""
"C<bootstrap> lists the sections which will be used to create the multistrap "
"itself. Only packages listed in C<bootstrap> will be downloaded and unpacked "
"by multistrap."
msgstr ""
#. type: textblock
#: pod/multistrap:163
msgid ""
"Make sure C<bootstrap> lists all sections you need for apt to be able to "
"find all the packages to be unpacked for the multistrap."
msgstr ""
#. type: textblock
#: pod/multistrap:166
msgid ""
"(Older versions of multistrap supported the same option under the "
"C<debootstrap> name - this spelling is still supported but new configuration "
"files should be C<bootstrap> instead."
msgstr ""
#. type: =head1
#: pod/multistrap:170
msgid "General settings:"
msgstr ""
#. type: textblock
#: pod/multistrap:172
msgid "'arch' can be overridden on the command line using the C<--arch> option."
msgstr ""
#. type: textblock
#: pod/multistrap:174
msgid ""
"'directory' specifies the top level directory where the bootstrap will be "
"created - it is not packed into a .tgz once complete."
msgstr ""
#. type: textblock
#: pod/multistrap:177
msgid ""
"'bootstrap' lists the Sections which will be used to specify the packages "
"which will be downloaded (and optionally unpacked) into the bootstrap."
msgstr ""
#. type: textblock
#: pod/multistrap:180
msgid ""
"'aptsources' lists the Sections which will be used to specify the apt "
"sources in the final system, e.g. if you need to use a local repository to "
"generate the rootfs which will not be available to the device at runtime, "
"list that section in C<bootstrap> but not in C<aptsources>."
msgstr ""
#. type: textblock
#: pod/multistrap:185
msgid ""
"If you want a package to be in the rootfs, it B<must> be specified in the "
"C<bootstrap> list under General."
msgstr ""
#. type: textblock
#: pod/multistrap:188
msgid "The order of section names in either list is not important."
msgstr ""
#. type: textblock
#: pod/multistrap:190
msgid ""
"If C<markauto> is set to true, C<multistrap> will request apt to mark all "
"packages specified in the combined C<packages> list as manually installed "
"and all dependencies not explicitly listed as automatically installed in the "
"APT extended state database. C<markauto> can be used independently of "
"C<unpack>."
msgstr ""
#. type: textblock
#: pod/multistrap:196
msgid ""
"As with debootstrap, multistrap will continue after errors, as long as the "
"configuration file can be correctly parsed."
msgstr ""
#. type: textblock
#: pod/multistrap:199
msgid ""
"multistrap also implements the machine:variant support originally used in "
"Emdebian Crush, although in a different implementation. Using the cascading "
"configuration support, particular machine:variant combinations can be "
"supported by simple changes on the command line."
msgstr ""
#. type: textblock
#: pod/multistrap:204
msgid ""
"Setting C<tarballname> to true also packs up the final filesystem into a "
"tarball."
msgstr ""
#. type: textblock
#: pod/multistrap:207
msgid ""
"Note that multistrap ignores any unrecognised options in the config file - "
"this allows for backwards-compatible behaviour as well as overloading the "
"multistrap config files to support other tools (like pbuilder). Use the "
"C<--simulate> option to see the combined configuration settings."
msgstr ""
#. type: textblock
#: pod/multistrap:213
msgid ""
"However, if the config file itself cannot be parsed, multistrap will "
"abort. Check that the config file has a key and a value for each line, other "
"than comments. Values must all on the same line as the key."
msgstr ""
#. type: =head1
#: pod/multistrap:217
msgid "Section settings"
msgstr ""
#. type: textblock
#: pod/multistrap:225
msgid ""
"The section name (in [] brackets) needs to be unique for this configuration "
"file and any configuration files which this file includes. Section names are "
"case insensitive (all comparisons happen after conversion to lower case)."
msgstr ""
#. type: textblock
#: pod/multistrap:230
msgid ""
"'packages' is the list of packages to be added when this Section is listed "
"in C<bootstrap> - all package names must be listed on a single line or the "
"file will fail to parse. One alternative is to define your list of packages "
"as multiple groups with packages separated on a functional / dependency "
"basis, e.g. base, Xorg, networking etc. and list each group under "
"'bootstrap'."
msgstr ""
#. type: verbatim
#: pod/multistrap:237
#, no-wrap
msgid ""
" bootstrap=base networking\n"
"\n"
msgstr ""
#. type: verbatim
#: pod/multistrap:239
#, no-wrap
msgid ""
" [base]\n"
" packages=udev mtd-utils\n"
" source=http://www.emdebian.org/grip\n"
" keyring=emdebian-archive-keyring\n"
" suite=lenny\n"
"\n"
msgstr ""
#. type: verbatim
#: pod/multistrap:245
#, no-wrap
msgid ""
" [networking]\n"
" packages=netbase ifupdown iproute net-tools samba\n"
" source=http://www.emdebian.org/grip\n"
" keyring=emdebian-archive-keyring\n"
" suite=lenny\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:251
msgid ""
"As a special case, C<multistrap> also supports multiple packages keys per "
"section, one line for each. Other keys cannot be repeated in this manner."
msgstr ""
#. type: verbatim
#: pod/multistrap:255
#, no-wrap
msgid ""
" [Emdebian]\n"
" packages=udev mtd-utils netbase ifupdown iproute\n"
" packages=busybox net-tools samba\n"
" source=http://www.emdebian.org/grip\n"
" keyring=emdebian-archive-keyring\n"
" suite=lenny\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:262
msgid ""
"'source' is the apt source to use for this Section. To use a local source on "
"the same machine, ensure you use C<copy://> not C<file://>, so that apt is "
"told to copy the packages into the rootfs instead of assuming it can try to "
"download them later - because that \"later\" will never actually happen."
msgstr ""
#. type: textblock
#: pod/multistrap:268
msgid ""
"'keyring' lists the package which contains the key used by the source listed "
"in this Section. If no keyring is specified, the C<noauth> option must be "
"set to B<true>. See Secure Apt."
msgstr ""
#. type: textblock
#: pod/multistrap:272
msgid ""
"'suite' is the suite to use from this source. Note that this should be the "
"suite, not the codename."
msgstr ""
#. type: textblock
#: pod/multistrap:275
msgid ""
"Suites change from time to time: (oldstable, stable, testing, sid) The "
"codename (etch, lenny, squeeze, sid) does not change."
msgstr ""
#. type: =head1
#: pod/multistrap:278
msgid "Secure Apt"
msgstr ""
#. type: textblock
#: pod/multistrap:280
msgid ""
"To use authenticated apt repositories, multistrap needs to be able to "
"install an appropriate keyring package from the existing apt sources "
"B<outside the multistrap environment> into the destination "
"system. Unfortunately, keyring packages cannot be downloaded from the "
"repositories specified in the multistrap configuration - this is because "
"C<apt> needs the keyring to be updated before being able to use repositories "
"not previously known."
msgstr ""
#. type: textblock
#: pod/multistrap:288
msgid ""
"If relevant packages exist, specify them in the 'keyring' option for each "
"repository. multistrap will then check that apt has already installed this "
"package so that the repository can be authenticated before any packages are "
"downloaded from it."
msgstr ""
#. type: textblock
#: pod/multistrap:293
msgid ""
"Note that B<all> repositories to be used with multistrap must be "
"authenticated or apt will fail. Similarly, secure apt can only be disabled "
"for all repositories (by using the --no-auth command line option or setting "
"the general noauth option in the configuration file), even if only one "
"repository does not have a suitable keyring available."
msgstr ""
#. type: textblock
#: pod/multistrap:300
msgid ""
"The keyring package(s) will also be installed inside the multistrap "
"environment to match the installed apt sources for the multistrap."
msgstr ""
#. type: =head1
#: pod/multistrap:303
msgid "State"
msgstr ""
#. type: textblock
#: pod/multistrap:305
msgid ""
"multistrap is stateless - if the directory exists, it will simply proceed as "
"normal and apt will try to pick up where it left off."
msgstr ""
#. type: =head1
#: pod/multistrap:308
msgid "Root Filesystem Configuration"
msgstr ""
#. type: textblock
#: pod/multistrap:310
msgid ""
"multistrap unpacks the downloaded packages but other stages of system "
"configuration are not attempted. Examples include:"
msgstr ""
#. type: verbatim
#: pod/multistrap:313
#, no-wrap
msgid ""
" /etc/inittab\n"
" /etc/fstab\n"
" /etc/hosts\n"
" /etc/securetty\n"
" /etc/modules\n"
" /etc/hostname\n"
" /etc/network/interfaces\n"
" /etc/init.d\n"
" /etc/dhcp3 \n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:323
msgid ""
"Any device-specific device nodes will also need to be created using MAKEDEV "
"or C<device-table.pl> - a helper script that can work around some of the "
"issues with MAKEDEV. F<device-table.pl> requires a device table file along "
"the lines of the one in the mtd-utils source package. See "
"F</usr/share/doc/multistrap/examples/device_table.txt>"
msgstr ""
#. type: textblock
#: pod/multistrap:329
msgid ""
"Once multistrap has successfully created the basic file and directory "
"layout, other device-specific scripts are needed before the filesystem can "
"be packaged up and installed onto the target device."
msgstr ""
#. type: textblock
#: pod/multistrap:334
msgid ""
"Once installed, the packages themselves need to be configured using the "
"package maintainer scripts and C<dpkg --configure -a>, unless this is a "
"native multistrap."
msgstr ""
#. type: textblock
#: pod/multistrap:338
msgid ""
"For C<dpkg> to work, F</proc> and F</sysfs> must be mounted (or mountable), "
"F</dev/pts> is also recommended."
msgstr ""
#. type: textblock
#: pod/multistrap:341
msgid "See also: http://wiki.debian.org/Multistrap"
msgstr ""
#. type: =head1
#: pod/multistrap:343
msgid "Environment"
msgstr ""
#. type: textblock
#: pod/multistrap:345
msgid ""
"To configure the unpacked packages (whether in native or cross mode), "
"certain environment variables are needed:"
msgstr ""
#. type: textblock
#: pod/multistrap:348
msgid "Debconf needs to be told to accept that user interaction is not desired:"
msgstr ""
#. type: verbatim
#: pod/multistrap:351
#, no-wrap
msgid ""
" DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:353
msgid ""
"Perl needs to be told to accept that no locales are available inside the "
"chroot and not to complain:"
msgstr ""
#. type: verbatim
#: pod/multistrap:356
#, no-wrap
msgid ""
" LC_ALL=C LANGUAGE=C LANG=C\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:358
msgid "Then, dpkg can configure the packages:"
msgstr ""
#. type: textblock
#: pod/multistrap:360
msgid "chroot method (PATH = top directory of chroot):"
msgstr ""
#. type: verbatim
#: pod/multistrap:362
#, no-wrap
msgid ""
" DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true \\\n"
" LC_ALL=C LANGUAGE=C LANG=C chroot /PATH/ dpkg --configure -a\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:365
msgid "at a login shell:"
msgstr ""
#. type: verbatim
#: pod/multistrap:367
#, no-wrap
msgid ""
" # export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true\n"
" # export LC_ALL=C LANGUAGE=C LANG=C \n"
" # dpkg --configure -a\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:371
msgid "(As above, dpkg needs F</proc> and F</sysfs> mounted first.)"
msgstr ""
#. type: =head1
#: pod/multistrap:373
msgid "Native mode - multistrap"
msgstr ""
#. type: textblock
#: pod/multistrap:375
msgid ""
"multistrap was not intended for native support, it was developed for cross "
"architecture support. In order for multiple repositories to be used, "
"multistrap only unpacks the packages selected by apt."
msgstr ""
#. type: textblock
#: pod/multistrap:379
msgid ""
"In native mode, various post-multistrap operations are likely to be needed "
"that debootstrap would do for you:"
msgstr ""
#. type: verbatim
#: pod/multistrap:382
#, no-wrap
msgid ""
" 1. copy /etc/hosts into the chroot\n"
" 2. clean the environment to unset LANGUAGE, LC_ALL and LANG\n"
" to silence nuisance perl warnings that obscure other errors\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:386
msgid ""
"(An alternative to unset the localisation variables is to add locales to "
"your multistrap configuration file in the 'packages' option."
msgstr ""
#. type: textblock
#: pod/multistrap:390
msgid ""
"A native multistrap can be used directly with chroot, so C<multistrap> runs "
"C<dpkg --configure -a> at the end of the multistrap process, unless the "
"B<ignorenativearch> option is set to true in the B<General> section of the "
"configuration file."
msgstr ""
#. type: =head1
#: pod/multistrap:395
msgid "Daemons in chroots"
msgstr ""
#. type: textblock
#: pod/multistrap:397
msgid ""
"Depending on which system you using to provide the packages for "
"C<multistrap>, native chroots should generally not allow daemons to start "
"inside the chroot. Use the F</usr/share/multistrap/chroot.sh> as your "
"C<setupscript> or include that script in your own setup script."
msgstr ""
#. type: verbatim
#: pod/multistrap:402
#, no-wrap
msgid ""
" setupscript=/usr/share/multistrap/chroot.sh\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:404
msgid "F<chroot.sh> copes with systems using F<sysvinit> and F<upstart>."
msgstr ""
#. type: textblock
#: pod/multistrap:406
msgid "See also"
msgstr ""
#. type: verbatim
#: pod/multistrap:408
#, no-wrap
msgid ""
" http://people.debian.org/~hmh/invokerc.d-policyrc.d-specification.txt\n"
"\n"
msgstr ""
#. type: =head1
#: pod/multistrap:410
msgid "Cascading configuration"
msgstr ""
#. type: textblock
#: pod/multistrap:412
msgid ""
"To support multiple variants of a basic (common) configuration, "
"C<multistrap> allows configuration files to include other (more general) "
"configuration files. i.e. the most detailed / specific configuration file is "
"specified on the command line and that file includes another file which is "
"shared by other configurations."
msgstr ""
#. type: textblock
#: pod/multistrap:418
msgid "Base file:"
msgstr ""
#. type: verbatim
#: pod/multistrap:420
#, no-wrap
msgid ""
" /usr/share/multistrap/crosschroot.conf\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:422
msgid "Variations:"
msgstr ""
#. type: verbatim
#: pod/multistrap:424
#, no-wrap
msgid ""
" /usr/share/multistrap/armel.conf\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:426
msgid ""
"Specifying just the armel.conf file will get the rest of the settings from "
"crosschroot.conf so that common changes only need to be made in a single "
"file."
msgstr ""
#. type: textblock
#: pod/multistrap:430
msgid ""
"It is B<strongly> recommended that any changes to the configuration files "
"involved in any particular cascade are tested using the C<--simulate> option "
"to multistrap which will output a summary of the options that have been set "
"once the cascade is complete. Note that multistrap does B<not warn you> if a "
"configuration file contains an unrecognised option (for future compatibility "
"with backported configurations), so a simple typo can result in an option "
"not being set."
msgstr ""
#. type: =head1
#: pod/multistrap:438
msgid "Machine:variant support"
msgstr ""
#. type: textblock
#: pod/multistrap:440
msgid ""
"The old packages.conf variables from emsandbox can all be converted into "
"C<multistrap> configuration variables. The machine:variant support in "
"C<multistrap> concentrates on the scripts, F<config.sh> and F<setup.sh>"
msgstr ""
#. type: textblock
#: pod/multistrap:445
msgid ""
"Note: B<machine:variant support is likely to be replaced by the hook "
"functionality described below.>"
msgstr ""
#. type: textblock
#: pod/multistrap:448
msgid ""
"Once C<multistrap> has unpacked the downloaded packages, the C<setup.sh> can "
"be called, passing the location and architecture of the root filesystem, so "
"that other fine tuning can take place. At this stage, any operations inside "
"a foreign architecture rootfs must not try to execute any binaries within "
"the rootfs. As the final stage of the multistrap process, C<config.sh> is "
"copied into the root directory of the rootfs."
msgstr ""
#. type: textblock
#: pod/multistrap:456
msgid ""
"One advantage of using machine:variant support is that the entire "
"rootfilesystem can be managed by a single call to multistrap - this is "
"useful when building root filesystems in userspace."
msgstr ""
#. type: textblock
#: pod/multistrap:460
msgid ""
"To enable machine:variant support, specify the path to the scripts to be "
"called in the variant configuration file (General section):"
msgstr ""
#. type: verbatim
#: pod/multistrap:463
#, no-wrap
msgid ""
" [General]\n"
" include=/path/to/general.conf\n"
" setupscript=/path/to/setup.sh\n"
" configscript=/path/to/config.sh\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:468
msgid ""
"Ensure that both the setupscript and the configscript are executable or "
"C<multistrap> will ignore the script."
msgstr ""
#. type: =item
#: pod/multistrap:473
msgid "Example configscript.sh"
msgstr ""
#. type: verbatim
#: pod/multistrap:475 pod/multistrap:733
#, no-wrap
msgid ""
" #!/bin/sh\n"
" \n"
msgstr ""
#. type: verbatim
#: pod/multistrap:477 pod/multistrap:735
#, no-wrap
msgid ""
" set -e\n"
" \n"
msgstr ""
#. type: verbatim
#: pod/multistrap:479
#, no-wrap
msgid ""
" export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true\n"
" export LC_ALL=C LANGUAGE=C LANG=C\n"
" /var/lib/dpkg/info/dash.preinst install\n"
" dpkg --configure -a\n"
" mount proc -t proc /proc\n"
" dpkg --configure -a\n"
" umount /proc\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:487
msgid "For more information, see the Wiki: http://wiki.debian.org/Multistrap"
msgstr ""
#. type: =item
#: pod/multistrap:490
msgid "Mounting /dev and /proc for chroot configuration"
msgstr ""
#. type: textblock
#: pod/multistrap:492
msgid "/proc can be mounted inside the chroot, as above:"
msgstr ""
#. type: verbatim
#: pod/multistrap:494
#, no-wrap
msgid ""
" mount proc -t proc /proc\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:496
msgid ""
"However, /dev should be mounted from outside the chroot, before running any "
"C<configscript.sh> in the chroot:"
msgstr ""
#. type: verbatim
#: pod/multistrap:499
#, no-wrap
msgid ""
" cd /path/chroot/\n"
" sudo tar -xzf /path/multistrap.tgz\n"
" sudo mount /dev -o bind ./dev/\n"
" sudo chroot . ./configscript.sh || true\n"
"\n"
msgstr ""
#. type: =head1
#: pod/multistrap:506
msgid "Restricting package selection"
msgstr ""
#. type: textblock
#: pod/multistrap:508
msgid ""
"C<multistrap> includes Required packages by default, the current list of "
"packages on your own machine can be seen using:"
msgstr ""
#. type: verbatim
#: pod/multistrap:511
#, no-wrap
msgid ""
" grep-available -FPriority 'required' -sPackage\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:513
msgid ""
"(The actual list is calculated from the downloaded Packages files and may "
"differ from the output of C<grep-available>.)"
msgstr ""
#. type: textblock
#: pod/multistrap:516
msgid ""
"If the OmitRequired option is set to true, these packages will not be added "
"- whilst useful, this option can easily lead to a useless rootfs. Only the "
"packages specified manually in the configuration files will be used in the "
"calculations - dependencies of those packages will be added but no others."
msgstr ""
#. type: =head1
#: pod/multistrap:522
msgid "Adding Priority: important packages"
msgstr ""
#. type: textblock
#: pod/multistrap:524
msgid ""
"C<multistrap> can imitate C<debootstrap> by automatically adding all "
"packages from all sections where the downloaded Packages file lists the "
"package as Priority: important. The default is not to add such packages "
"unless individually included in a C<packages=> option in a section specified "
"in the C<bootstrap> general option. To add all such packages, set the "
"addimportant option to true in the general section."
msgstr ""
#. type: verbatim
#: pod/multistrap:532
#, no-wrap
msgid ""
" addimportant=true\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:534
msgid ""
"Priority: important can only operate for all sections listed in the "
"C<bootstrap> option. This may cause some confusion when mixing suites."
msgstr ""
#. type: textblock
#: pod/multistrap:537
msgid ""
"It is not possible to enable addimportant and omitrequired in the same "
"configuration. C<multistrap> will exit with error code 7 if any "
"configuration results in addimportant and omitrequired both being set to "
"true. (This includes the effects of including other configuration files.)"
msgstr ""
#. type: =head1
#: pod/multistrap:543
msgid "Recommends behaviour"
msgstr ""
#. type: textblock
#: pod/multistrap:545
msgid ""
"The Debian default behaviour after the Lenny release was to consider "
"recommended packages as extra packages to be installed when any one package "
"is selected. Recommended packages are those which the maintainer considers "
"that would be present on C<most> installations of that package and allowing "
"Recommends means allowing Recommends of recommended packages and so on."
msgstr ""
#. type: textblock
#: pod/multistrap:552
msgid "The multistrap default is to turn recommends OFF."
msgstr ""
#. type: textblock
#: pod/multistrap:554
msgid ""
"Set the allowrecommends option to true in the General section to use typical "
"Debian behaviour."
msgstr ""
#. type: =head1
#: pod/multistrap:557
msgid "Default release"
msgstr ""
#. type: textblock
#: pod/multistrap:559
msgid ""
"C<multistrap> supports an option to explicitly set the default release to "
"use with apt: C<aptdefaultrelease>. This determines which release apt will "
"use for the base system packages and is not the same as pinning (which "
"relates to the use of apt after installation). Multistrap sets the "
"default-release to the wildcard * unless a release is named in the "
"C<aptdefaultrelease> field. Any release specified here must also be defined "
"in a stanza referenced in the bootstrap list or apt will fail."
msgstr ""
#. type: textblock
#: pod/multistrap:567
msgid ""
"To install a specific version of a package from a newer release than the one "
"specified as default, C<explicitsuite> must also be set to true if the "
"package exists at any version in the default release. Also, any packages "
"upon which that package has a strict dependency (i.e. = rather than >=) must "
"also be explicitly added to the packages line in the stanza for the desired "
"version, even though that package does not need to be listed to get it from "
"the default release. This is typical apt behaviour and is not a bug in "
"multistrap."
msgstr ""
#. type: textblock
#: pod/multistrap:576
msgid ""
"The combination of default release, explicit suite and apt preferences can "
"quickly become complex and bugs can be very hard to identify. C<multistrap> "
"always outputs the complete apt command line, so test this command yourself "
"(using the files written out by C<multistrap>) to see what is going "
"on. Remember that all dependency resolution and all the logic to determine "
"which version of a specific package gets installed in your C<multistrap> "
"chroot is entirely down to apt and all C<multistrap> can do is pass files "
"and command line options to apt."
msgstr ""
#. type: textblock
#: pod/multistrap:585
msgid "See also: apt preferences."
msgstr ""
#. type: =head1
#: pod/multistrap:587
msgid "Explicit suite specification"
msgstr ""
#. type: textblock
#: pod/multistrap:589
msgid ""
"Sometimes, apt needs to be told to get a particular package from a "
"particular suite, ignoring a more recent version in another suite in the "
"same set of sources."
msgstr ""
#. type: textblock
#: pod/multistrap:593
msgid ""
"C<multistrap> can operate with and without the explicit suite option, the "
"default is to let apt use the most recent version from the collection of "
"specified F<bootstrap> sources."
msgstr ""
#. type: textblock
#: pod/multistrap:597
msgid ""
"Explicit suite specification has no effect on the final installed system - "
"if your aptsources includes a repository which in turn includes a newer "
"version of the package(s) specified explicitly, the next C<apt-get upgrade> "
"on the device will bring in the newer version."
msgstr ""
#. type: textblock
#: pod/multistrap:602
msgid ""
"Also, when specifying packages to get from a specific suite, apt will also "
"try and ensure that the dependencies for that package are also from the same "
"suite and this can cause apt to be unable to resolve the complete set of "
"dependencies. In this situation, being explicit about one package selection "
"may require being explicit about some (not necessarily all) of the "
"dependencies of that package as well."
msgstr ""
#. type: textblock
#: pod/multistrap:609
msgid ""
"When using this support in Lenny, ensure that each section uses the suite "
"(oldstable, stable, testing, sid) and B<not> the codename (etch, lenny, "
"squeeze, sid) in the C<suite> configuration item as the version of apt in "
"Lenny and previous cannot use the codename."
msgstr ""
#. type: textblock
#: pod/multistrap:614
msgid "To test, on Lenny, try:"
msgstr ""
#. type: verbatim
#: pod/multistrap:616
#, no-wrap
msgid ""
" $ sudo apt-get install apt/stable\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:618
msgid "Compare with"
msgstr ""
#. type: verbatim
#: pod/multistrap:620
#, no-wrap
msgid ""
" $ sudo apt-get install apt/lenny\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:622
msgid ""
"When using explicitsuite, take care in using stable-proposed-updates or "
"other temporary locations - if the package migrates into another suite and "
"is removed from the temporary suite (as with *-proposed-updates), multistrap "
"will not be able to find the package."
msgstr ""
#. type: textblock
#: pod/multistrap:628
msgid ""
"Explicit suite handling can be very hard to get right. In general, it is "
"best to create a small bootstrap chroot of your native arch, then chroot "
"into it, add the relevant apt sources and work out exactly what commands are "
"necessary to get the correct mix of packages. Avoid specifying explicit "
"versions to sort out problems, work with suites only. Apt preferences / "
"pinning may be useful here, see Apt preferences."
msgstr ""
#. type: =head1
#: pod/multistrap:635
msgid "Apt preferences"
msgstr ""
#. type: textblock
#: pod/multistrap:637
msgid ""
"If a suitable file is listed in the B<aptpreferences> option of the "
"B<General> section of the configuration file, this file will be copied into "
"the apt preferences directory of the bootstrap before apt is first used."
msgstr ""
#. type: textblock
#: pod/multistrap:642
msgid ""
"When an apt preferences file B<is> provided, the C<Default-Release> "
"behaviour of C<multistrap> is disabled."
msgstr ""
#. type: textblock
#: pod/multistrap:645
msgid ""
"As with other external scripts and files, the content of the apt preferences "
"file is beyond the scope of this manpage. C<multistrap> does not try to "
"verify the supplied file other than ensuring that it can be read."
msgstr ""
#. type: =head1
#: pod/multistrap:650
msgid "Omitting deb-src listings"
msgstr ""
#. type: textblock
#: pod/multistrap:652
msgid ""
"Some multistrap environments do not need access to the Debian sources of "
"packages being installed, typically this is required when preparing a build "
"(or cross-build) chroot using multistrap."
msgstr ""
#. type: textblock
#: pod/multistrap:656
msgid ""
"To turn off this additional source (and save both download time and "
"apt-cache size), use the omitdebsrc field in each Section."
msgstr ""
#. type: verbatim
#: pod/multistrap:659
#, no-wrap
msgid ""
" [Baked]\n"
" packages=\n"
" source=http://www.emdebian.org/baked\n"
" keyring=emdebian-archive-keyring\n"
" suite=testing\n"
" omitdebsrc=true\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:666
msgid ""
"omitdebsrc is necessary when using packages from debian-ports where packages "
"do not have sources, except \"unreleased\"."
msgstr ""
#. type: =head1
#: pod/multistrap:669
msgid "fakeroot"
msgstr ""
#. type: textblock
#: pod/multistrap:671
msgid ""
"Foreign architecture bootstraps can operate under C<fakeroot> (C<multistrap> "
"is designed to do as much as it can within a single call to make this "
"easier) but the configuration stage which normally happens with a native "
"architecture bootstrap requires C<chroot> and C<chroot> itself will not "
"operate under C<fakeroot>."
msgstr ""
#. type: textblock
#: pod/multistrap:677
msgid ""
"Therefore, if C<multistrap> detects that C<fakeroot> is in use, native mode "
"configuration is skipped with a reminder warning."
msgstr ""
#. type: textblock
#: pod/multistrap:680
msgid ""
"The same problem applies to C<apt-get install> and therefore the "
"installation of the keyring package on the host system is also skipped if "
"fakeroot is detected."
msgstr ""
#. type: =head1
#: pod/multistrap:684
msgid "Handling problematic packages"
msgstr ""
#. type: textblock
#: pod/multistrap:686
msgid ""
"Sometimes, a particular package will fail to even unpack properly if other "
"packages have not already been unpacked. This can happen if dpkg diversions "
"are not setup correctly or if the package Pre-Depends on an executable in "
"another package."
msgstr ""
#. type: textblock
#: pod/multistrap:691
msgid ""
"Multistrap offers two ways to handle these problems. A package can be listed "
"as C<reinstall> or as C<additional>. Each section in the C<multistrap> "
"configuration file can have a single C<reinstall> or C<additional> listing "
"or both."
msgstr ""
#. type: textblock
#: pod/multistrap:696
msgid ""
"Reinstall means that the package will be downloaded and unpacked as normal - "
"alongside all the other packages, but will then be reinstalled at the end by "
"running the C<preinst> maintainer script with the C<upgrade> "
"argument. C<dpkg> will then continue the rest of the configuration of that "
"package."
msgstr ""
#. type: textblock
#: pod/multistrap:702
msgid ""
"Additional adds a second round of C<apt-get install> to the multistrap "
"process - after the initial unpacking. The additional package will then be "
"downloaded and unpacked. If running natively, the additional package is "
"downloaded, unpacked and configured after all the rest of the packages have "
"been downloaded, unpacked and configured."
msgstr ""
#. type: textblock
#: pod/multistrap:708
msgid ""
"Neither C<reinstall> nor C<additional> should be seen as more than just "
"workarounds and wishlist bugs should be filed in Debian against packages "
"which require the use of these mechanisms (or the packages which would "
"prevent the particular package from operating normally)."
msgstr ""
#. type: =head1
#: pod/multistrap:713
msgid "Debconf preseeding"
msgstr ""
#. type: textblock
#: pod/multistrap:715
msgid ""
"Adding a debconf seed can help in configuring packages to a particular "
"setting instead of the package default when running the configuration "
"non-interactively. See http://www.debian-administration.org/articles/394 for "
"information on how to create seed files."
msgstr ""
#. type: textblock
#: pod/multistrap:720
msgid ""
"Multiple seed files can be specified using the debconfseed field in the "
"[General] section, separated by spaces:"
msgstr ""
#. type: verbatim
#: pod/multistrap:723
#, no-wrap
msgid ""
" debconfseed=seed1 seed2\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:725
msgid ""
"Files which do not exist or which cannot be opened will be silently "
"ignored. Check the results of the parsing using the C<--simulate> option to "
"C<multistrap>. The preseeding files will be copied to a preseed directory in "
"/tmp inside the rootfs."
msgstr ""
#. type: textblock
#: pod/multistrap:730
msgid ""
"To use the preseeding, add a section to the configscript.sh, prior to any "
"calls to B<dpkg --configure -a>. e.g. :"
msgstr ""
#. type: verbatim
#: pod/multistrap:737
#, no-wrap
msgid ""
" export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true\n"
" export LC_ALL=C LANGUAGE=C LANG=C\n"
" if [ -d /tmp/preseeds/ ]; then\n"
" for file in `ls -1 /tmp/preseeds/*`; do\n"
" debconf-set-selections $file\n"
" done\n"
" fi\n"
" dpkg --configure -a\n"
"\n"
msgstr ""
#. type: =head1
#: pod/multistrap:746
msgid "Hooks"
msgstr ""
#. type: textblock
#: pod/multistrap:748
msgid ""
"If a hook directory (hookdir=) is specified in the General section of the "
"C<multistrap> configuration file, the hook scripts which are executable will "
"be run from outside the multistrap directory at the following stages:"
msgstr ""
#. type: =item
#: pod/multistrap:754
msgid "download hooks"
msgstr ""
#. type: textblock
#: pod/multistrap:756
msgid ""
"Executed before unpacking is started, immediately after the packages have "
"been downloaded. Download hooks are executable scripts in the specified hook "
"directory with a filename beginning with B<download>."
msgstr ""
#. type: =item
#: pod/multistrap:760
msgid "native hooks"
msgstr ""
#. type: textblock
#: pod/multistrap:762
msgid ""
"Native hook scripts are executed only in native mode, immediately before "
"starting the configuration of the downloaded packages and again upon "
"completion of the package configuration. Native hooks will be called the "
"absolute path and the current progress state, start or end."
msgstr ""
#. type: textblock
#: pod/multistrap:767
msgid ""
"Native scripts are executable scripts in the specified hook directory with a "
"filename beginning with B<native>."
msgstr ""
#. type: =item
#: pod/multistrap:770
msgid "completion hooks"
msgstr ""
#. type: textblock
#: pod/multistrap:772
msgid ""
"Executed immediately before the tarball is created or C<multistrap> exits if "
"not configured to create a tarball."
msgstr ""
#. type: textblock
#: pod/multistrap:775
msgid ""
"Completion scripts are executable scripts in the specified hook directory "
"with a filename beginning with B<completion>."
msgstr ""
#. type: textblock
#: pod/multistrap:780
msgid ""
"Hooks are passed the absolute path to the directory which will be the top "
"level directory of the chroot or multistrap system. Hooks which cannot be "
"resolved using realpath or which are not executable will be ignored."
msgstr ""
#. type: textblock
#: pod/multistrap:785
msgid "All hooks of one type are sorted into alphabetical order before being run."
msgstr ""
#. type: textblock
#: pod/multistrap:788
msgid ""
"Note that C<multistrap> does not rollback the effects of hooks in the case "
"of errors. However, C<multistrap> will report the accumulated errors as "
"warnings. If a hook exits non-zero, the exit value is converted to a "
"positive number and added to the total warning count, reported at the end of "
"the operation."
msgstr ""
#. type: =head1
#: pod/multistrap:794
msgid "Output"
msgstr ""
#. type: textblock
#: pod/multistrap:796
msgid ""
"C<multistrap> can produce a lot of output - informational messages appear on "
"STDOUT, errors and warnings on STDERR. Calls to C<apt> and C<dpkg> respect "
"the same pattern, so it is simple to trim the combined C<multistrap> output "
"to just the errors, if desired."
msgstr ""
#. type: textblock
#: pod/multistrap:801
msgid ""
"C<multistrap> accumulates error states from non-fatal processes within the "
"operation and reports these as warnings on STDERR as well as exiting with "
"the accumulated error count. This includes hooks which report non-zero exit "
"values."
msgstr ""
#. type: =head1
#: pod/multistrap:806
msgid "Bugs"
msgstr ""
#. type: textblock
#: pod/multistrap:808
msgid ""
"As C<multistrap> gets more complex, bugs will creep into the package. "
"Please report all bugs to the Debian BTS using the C<reportbug> tool and "
"B<please> attach all configuration files. If your configuration needs to "
"access local or private apt repositories, please check your configuration "
"with the latest version of C<multistrap> in Debian using the C<--simulate> "
"option and include that report in your bug report."
msgstr ""
#. type: textblock
#: pod/multistrap:815
msgid ""
"The C<--simulate> option output is regularly expanded to help users debug "
"problems in the configuration files."
msgstr ""
#. type: textblock
#: pod/multistrap:818
msgid ""
"Please also check (and update) the Multistrap wiki at "
"http://wiki.debian.org/Multistrap and the Multistrap webpage content at "
"http://www.emdebian.org/multistrap/ before filing bugs. Various people on "
"the debian-embedded@lists.debian.org mailing list and #emdebian IRC channel "
"on irc.oftc.net can also help if your config file does not parse "
"correctly. You would need to put the C<--simulate> output on a pastebin "
"website and put the URL in your message."
msgstr ""
#. type: =head1
#: pod/multistrap:826
msgid "MultiArch support"
msgstr ""
#. type: textblock
#: pod/multistrap:828
msgid ""
"Multiarch support is experimental - please report issues and file bugs with "
"full details of your setup, the full multistrap config file and the errors "
"reported."
msgstr ""
#. type: textblock
#: pod/multistrap:832
msgid ""
"C<multistrap> overrides the existing multiarch support of the external "
"system so that a MultiArch aware system can still create a non-MultiArch "
"chroot from repositories which do not support all of the architectures "
"supported by the external dpkg."
msgstr ""
#. type: textblock
#: pod/multistrap:837
msgid ""
"If multiarch is enabled within the multistrap chroot, C<multistrap> writes "
"out the list into F</var/lib/dpkg/arch> inside the chroot."
msgstr ""
#. type: textblock
#: pod/multistrap:840
msgid ""
"For multiple architectures, specify the option once and use a space "
"separated list for the architecture list. Ensure you include what will be "
"the host architecture of the chroot."
msgstr ""
#. type: textblock
#: pod/multistrap:844
msgid "See also http://wiki.debian.org/Multiarch/"
msgstr ""
#. type: verbatim
#: pod/multistrap:846
#, no-wrap
msgid ""
" [General]\n"
" ...\n"
" multiarch=i386 armel armhf\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:850
msgid ""
"Each Section will install packages from the base architecture unless the "
"C<Architecture> option is specified for particular sections."
msgstr ""
#. type: verbatim
#: pod/multistrap:853
#, no-wrap
msgid ""
" [Foreign]\n"
" packages=libgcc1 libc6\n"
" architecture=armel\n"
" source=http://ftp.uk.debian.org/debian\n"
" keyring=debian-archive-keyring\n"
" suite=sid\n"
"\n"
msgstr ""
#. type: textblock
#: pod/multistrap:860
msgid ""
"In the C<--simulate> output, the architecture(s) specified in the MultiArch "
"option will be listed under the \"Foreign architectures\" listing. Packages "
"for a specific architecture will be listed as the package name followed by a "
"colon followed by the architecture."
msgstr ""
#. type: verbatim
#: pod/multistrap:865
#, no-wrap
msgid ""
" libgcc1:armel libc6:armel\n"
"\n"
msgstr ""
#. type: textblock
#: device-table.pl:167
msgid "device-table.pl - parses simple device tables and passes to mknod"
msgstr ""
#. type: verbatim
#: device-table.pl:171
#, no-wrap
msgid ""
" device-table.pl [-n|--dry-run] [-d DIR] [-f FILE]\n"
" device-table.pl -?|-h|--help|--version\n"
"\n"
msgstr ""
#. type: textblock
#: device-table.pl:176
msgid ""
"By default, F<device-table.pl> writes out the device nodes in the current "
"working directory. Use the directory option to write out elsewhere."
msgstr ""
#. type: textblock
#: device-table.pl:179
msgid ""
"multistrap contains a default device-table file, use the file option to "
"override the default F</usr/share/doc/multistrap/examples/device_table.txt>"
msgstr ""
#. type: textblock
#: device-table.pl:182
msgid "Use the dry-run option to see the commands that would be run."
msgstr ""
#. type: textblock
#: device-table.pl:184
msgid ""
"Device nodes need fakeroot or another way to use root access. If "
"F<device-table.pl> is already being run under fakeroot or equivalent, the "
"existing fakeroot session will be used, alternatively, use the no-fakeroot "
"option to drop the internal fakeroot usage."
msgstr ""
#. type: textblock
#: device-table.pl:189
msgid ""
"Note that fakeroot does not support changing the actual ownerships, for "
"that, run the final packing into a tarball under fakeroot as well, or use "
"C<sudo> when running F<device-table.pl>"
msgstr ""
#. type: =head1
#: device-table.pl:193
msgid "Device table format"
msgstr ""
#. type: textblock
#: device-table.pl:195
msgid ""
"Device table files are tab separated value files (TSV). All lines in the "
"device table must have exactly 10 entries, each separated by a single tab, "
"except comments - which must start with #"
msgstr ""
#. type: textblock
#: device-table.pl:199
msgid "Device table entries take the form of:"
msgstr ""
#. type: verbatim
#: device-table.pl:201
#, no-wrap
msgid ""
" <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n"
"\n"
msgstr ""
#. type: textblock
#: device-table.pl:203
msgid "where name is the file name, type can be one of:"
msgstr ""
#. type: verbatim
#: device-table.pl:205
#, no-wrap
msgid ""
" f A regular file\n"
" d Directory\n"
" s symlink\n"
" h hardlink\n"
" c Character special device file\n"
" b Block special device file\n"
" p Fifo (named pipe)\n"
"\n"
msgstr ""
#. type: textblock
#: device-table.pl:213
msgid ""
"symlinks and hardlinks are extensions to the device table, just for "
"F<device-table.pl>, other device table parsers might not handle these "
"types. The first field of the symlink command is the existing target of the "
"symlink, the third field is the full path of the symlink itself. e.g."
msgstr ""
#. type: verbatim
#: device-table.pl:219
#, no-wrap
msgid ""
" /proc/self/fd/0 s /dev/stdin - - - - - - -\n"
"\n"
msgstr ""
#. type: textblock
#: device-table.pl:221
msgid "See http://wiki.debian.org/DeviceTableScripting"
msgstr ""