initial commit

debian/gsm0710muxd/compat

@@ -0,0 +1 @@
+7

debian/gsm0710muxd/control

@@ -0,0 +1,17 @@
+Source: gsm0710muxd
+Section: misc
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7.0.50~), autotools-dev, libdbus-glib-1-dev, libglib2.0-dev, libdbus-1-dev
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: gsm0710muxd
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, dbus
+Description: GSM 07.10 Multiplexer
+ pyneo mobile stack: muxer as GSM 07.10 describes.
+ A muxer for gsm modems to allow more than one channel to be used with
+ the modem. Each channel can be used to issue phonecalls, watch signal
+ strength, receiving sms or even doing ppp (gprs) at the same time.
+ Access to the multiplexer is managed via D-Bus.

debian/gsm0710muxd/copyright

@@ -0,0 +1,34 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 23 June 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2003, 2006 Tuukka Karvonen <tkarvone@iki.fi>
+ * Copyright © 2004 David Jander <david@protonic.nl>
+ * Copyright © 2006 Antti Haapakoski <antti.haapakoski@iki.fi>
+ * Copyright © 2006 Vasiliy Novikov <vn@hotbox.ru>
+ * Copyright © 2008 M. Dietrich <mdt@emdete.de>
+
+For the Debian packaging:
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This package is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This package is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this package; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-2'.

debian/gsm0710muxd/gsm0710muxd.8

@@ -0,0 +1,103 @@
+.\" -*- nroff -*-
+.TH GSM0710MUXD 8 "23 June 2009" "gsm0710muxd"
+.SH NAME
+gsm0710muxd \- a gsm 07.10 muxer
+.SH SYNOPSIS
+.B gsm0710muxd [options]
+
+.SH DESCRIPTION
+.B 
+A gsm muxer is needed to keep a ppp/gprs up & running while sms and
+calls are still signaled on another channel. Some modems even support
+using gprs while a call is active, others suspend gprs during calls.
+
+The muxer supports various options to change the behaviour for
+different modems. Use -h to see a brief help screen.
+
+All logging is done through syslog, see the syslog for errors and
+warnings.
+
+.SH "COMMAND\-LINE OPTIONS"
+
+.TP 0.5i
+.B -d
+Fork, get a daemon (default: no)
+
+.TP 0.5i
+.B -v
+Verboser logging (give twice for even more verbose)
+
+.TP 0.5i
+.B -s <serial port name>
+Serial port device to connect to (default: /dev/modem)
+
+.TP 0.5i
+.B -t <timeout>
+reset modem after this number of seconds of silence (default: 0)
+
+.TP 0.5i
+.B -P <pin-code>
+PIN code to unlock SIM (default: <not set>). This is normally not
+needed but some modems need the pin before enabling the muxer mode.
+
+.TP 0.5i
+.B -p <number>
+use ping and reset modem after this number of unanswered pings (default: 0)
+
+.TP 0.5i
+.B -l <filename>
+set logfile name (default: <not set>)
+
+.TP 0.5i
+.B -x <dir>
+power managment base dir (default: <not set>)
+
+.TP 0.5i
+.B -a <mode>
+additional_functionality (default: 0). This is a bit-set enabling
+quirks for different modem. The quirks are: WAKEUP_WITH_SYSFS = 1,
+WAKEUP_WITH_SEQUENCE = 2, SIEMENS_C35 = 4, ENFORA = 8, SHORT_INIT =
+16.
+
+.TP 0.5i
+.B -b <baudrate>
+muxer-mode baudrate (default: 115200)
+
+.TP 0.5i
+.B -B <baudrate>
+serial port baudrate (default: 115200)
+
+.TP 0.5i
+.B -m <mode>
+Mode (basic, advanced) (default: advanced)
+
+.TP 0.5i
+.B -f <framsize>
+Frame size (default: 64)
+
+.TP 0.5i
+.B -h
+Show a help message and display current settings.
+
+
+.SH HISTORY
+
+The name 'gsm0710muxd' was choosen because the gsm specs describe this
+method in document 7.10.
+
+.SH BUGS/LIMITATIONS
+
+.B gsm0710muxd
+There may accure bufferoverruns and thus missing data between muxer
+and client under certain situations.
+
+Some settings could be determined by a AT-command at startup. This wouldn't be
+much reliable because modems often lie so i did not invest to much work in
+this.
+
+.SH AUTHOR
+M. Dietrich <mdt@pyneo.org>
+
+.SH SEE ALSO
+ptsname(3)
+

debian/gsm0710muxd/gsm0710muxd.manpages

@@ -0,0 +1 @@
+debian/gsm0710muxd.8

debian/gsm0710muxd/rules

@@ -0,0 +1,7 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@
+
+override_dh_installinit:
+	dh_installinit -o -- defaults 19 81

debian/gsm0710muxd/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/pyneo-pybankd/compat

@@ -0,0 +1 @@
+7

debian/pyneo-pybankd/control

@@ -0,0 +1,20 @@
+Source: pyneo-pybankd
+Section: python
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7), python-support (>= 0.5.3), python, python2.5-dev, python2.6-dev, cython, libgwenhywfar47-dev, libaqbanking29-dev
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: pyneo-pybankd
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, ${python:Depends}, pyneo-pyneod (>= 1.23)
+Description: pyneo mobile stack: daemon module for banking
+ this is the separated bank module for pyneod. it requires aqbanking installed
+ and successful configured. it does not contain any gui to do configuration and
+ does not contain other code than to get transactions and balance from your
+ bankaccounts.
+ .
+ if your setup of aqbanking is finished successfully pybankd will request
+ transactions from your bank at a regular basis, put these into the database and
+ fire D-Bus signals for each new transaction.

debian/pyneo-pybankd/copyright

@@ -0,0 +1,30 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Thu, 10 December 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2008-2009 M. Dietrich <mdt@pyneo.org>
+
+For the Debian packaging:
+
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/pyneo-pybankd/patches/remove-makefile.patch

@@ -0,0 +1,28 @@
+Index: pyneo-pybankd-20100916/Makefile
+===================================================================
+--- pyneo-pybankd-20100916.orig/Makefile	2010-09-16 17:34:08.971265997 +0200
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
+@@ -1,23 +0,0 @@
+-#!/usr/bin/env make -f
+-#HOST=murphy
+-#HOST=gta01
+-HOST=gta02
+-PYTHON_VERSION=2.6
+-
+-.PHONY: dbg all run clean
+-
+-all: build/lib.linux-i686-$(PYTHON_VERSION)/aqbanking.so
+-
+-dbg: clean
+-	rsync --verbose --archive pybankd.py root@$(HOST):/usr/share/pyneod/.
+-
+-run: build/lib.linux-i686-$(PYTHON_VERSION)/aqbanking.so
+-	PYTHONPATH=build/lib.linux-i686-$(PYTHON_VERSION):../python-pyneo \
+-	python$(PYTHON_VERSION) -u ./pybankd.py
+-
+-clean:
+-	rm -rf *.c *.o *.so core build
+-
+-build/lib.linux-i686-$(PYTHON_VERSION)/aqbanking.so: aqbanking.pyx
+-	python$(PYTHON_VERSION) setup.py build
+-

debian/pyneo-pybankd/patches/series

@@ -0,0 +1 @@
+remove-makefile.patch

debian/pyneo-pybankd/pycompat

@@ -0,0 +1 @@
+2

debian/pyneo-pybankd/pyversions

@@ -0,0 +1 @@
+2.5-

debian/pyneo-pybankd/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

debian/pyneo-pybankd/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/pyneo-pyneod/compat

@@ -0,0 +1 @@
+7

debian/pyneo-pyneod/control

@@ -0,0 +1,22 @@
+Source: pyneo-pyneod
+Section: python
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7.0.50~), python-support (>= 0.5.3), python
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: pyneo-pyneod
+Architecture: all
+Depends: ${misc:Depends}, ${python:Depends}, gsm0710muxd (>= 1.13), python-simplejson, python-crypto, python-dbus, python-pyneo (>= 1.26), python-gobject, python-gdbm, python-serial, python-gst0.10, gstreamer0.10-plugins-base, ppp, bluez, python-feedparser
+Recommends: gstreamer0.10-plugins-good, youtube-dl
+Description: pyneo mobile stack: daemon suite
+ The functionality of pyneo is put into daemons reachable via D-Bus.
+ Anything, even http-requests are a service which can be triggered by a
+ D-Bus call. All special requirements by mobile devices are met here.
+ .
+ The list currently include services for GSM (call, SMS, pb and cb),
+ GPS (NMEA and u-blox), map (with maps from OSM, Google and Yahoo),
+ Google location lookup by cell id, audio (for MP3 playback and
+ ringtones), traffic map (currently only Germany) rail timetable
+ (Europe), Hot or Not and more.

debian/pyneo-pyneod/copyright

@@ -0,0 +1,32 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 23 June 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2007 - 2009 M. Dietrich <mdt@pyneo.org>
+ * Copyright © 2008, 2009 M. Scheller <jawarumnur@pyneo.org>
+ * Copyright © 2008, 2009 J. Schauer <josch@pyneo.org>
+ * Copyright © 2008, 2009 F. Gau <fgau@pyneo.org>
+
+For the Debian packaging:
+ * Copyright © 2009 J. Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/pyneo-pyneod/patches/remove-makefile.patch

@@ -0,0 +1,33 @@
+Index: pyneo-pyneod-1.32/Makefile
+===================================================================
+--- pyneo-pyneod-1.32.orig/Makefile	2010-08-24 17:38:30.000000000 +0000
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
+@@ -1,28 +0,0 @@
+-#!/usr/bin/env make -f
+-#HOST=murphy
+-#HOST=gta01
+-HOST=gta02
+-
+-.PHONY: all
+-all: clean
+-	./setup.py bdist
+-
+-.PHONY: run
+-run:
+-	PYTHONPATH=src:../python-pyneo ./src/pyrssd.py
+-
+-.PHONY: dbg
+-dbg: clean
+-	rsync --verbose --archive data/. src/. root@$(HOST):/usr/share/pyneod/.
+-
+-.PHONY: clean
+-clean:
+-	for n in `cat ../.gitignore`; do \
+-		if echo $$n | grep -q /; then \
+-			rm -rfv "$$n"; \
+-		else \
+-			find . -name "$$n" | xargs rm -fv; \
+-		fi \
+-	done
+-
+-# TODO: grep \(DIN_ *.py|sed 's/,.*//'|sed 's/.py:.*(/\t/'|sort -u

debian/pyneo-pyneod/patches/series

@@ -0,0 +1 @@
+remove-makefile.patch

debian/pyneo-pyneod/pycompat

@@ -0,0 +1 @@
+2

debian/pyneo-pyneod/pyversions

@@ -0,0 +1 @@
+2.5-

debian/pyneo-pyneod/rules

@@ -0,0 +1,7 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@
+
+override_dh_installinit:
+	dh_installinit --name=pyneod -o -- defaults 20 80

debian/pyneo-pyneod/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/pyneo-resolvconf/compat

@@ -0,0 +1 @@
+7

debian/pyneo-resolvconf/control

@@ -0,0 +1,18 @@
+Source: pyneo-resolvconf
+Section: net
+Priority: optional
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7)
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: pyneo-resolvconf
+Architecture: all
+Depends: ${misc:Depends}, dnsmasq, dhcpcd5
+Recommends: udev, wpasupplicant, vpnc, ppp
+Conflicts: ifupdown, netplug, dhcp3-client, dhcdbd, ifplugd, resolvconf, avahi-daemon, libnss-mdns, network-manager, wicd, connman, wireless-tools, isc-dhcp-client, pump, udhcpc
+Description: nameserver update script
+ this resolvconf-replacement does update the nameserver in a running
+ dnsmasq ns-proxy via D-Bus. there is no symlinking, moving or rewriting
+ of files and no polling. Because of the simplicity and the using of
+ signaling via D-Bus this is incredible fast and reliable.

debian/pyneo-resolvconf/copyright

@@ -0,0 +1,29 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 13 September 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright ©2009 M. Dietrich <mdt@pyneo.org>
+
+For the Debian packaging:
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/pyneo-resolvconf/pyneo-resolvconf.manpages

@@ -0,0 +1 @@
+usr/share/man/man8/resolvconf.8

debian/pyneo-resolvconf/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

debian/pyneo-resolvconf/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/pyneo-zadosk/compat

@@ -0,0 +1 @@
+7

debian/pyneo-zadosk/control

@@ -0,0 +1,13 @@
+Source: pyneo-zadosk
+Section: python
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7), python-support (>= 0.5.3), python, python-dev, cython, libfakekey-dev, libx11-dev
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: pyneo-zadosk
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, ${python:Depends}, python-evas, python-ecore, python-simplejson
+Description: short description
+ long description with mor

debian/pyneo-zadosk/copyright

@@ -0,0 +1,30 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 23 June 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2008-2009 M. Dietrich <mdt@pyneo.org>
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+For the Debian packaging:
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/pyneo-zadosk/patches/remove-makefile.patch

@@ -0,0 +1,29 @@
+--- a/Makefile
++++ /dev/null
+@@ -1,26 +0,0 @@
+-#!/usr/bin/env make -f
+-#HOST=murphy
+-#HOST=gta01
+-#HOST=gta02
+-HOST=metab
+-#HOST=ben
+-ARCH=`uname -m`
+-PYTHON_VERSION=2.6
+-
+-.PHONY: dbg all run clean
+-
+-all: build/lib.linux-$(ARCH)-$(PYTHON_VERSION)/fakekey.so
+-
+-dbg: all
+-	rsync --verbose --archive --delete ../zadosk mdt@$(HOST):pyneo/.
+-
+-run: all
+-	PYTHONPATH=build/lib.linux-$(ARCH)-$(PYTHON_VERSION) \
+-	python$(PYTHON_VERSION) -u pyneo/zad/osk/__init__.py resources/ organic.json
+-
+-clean:
+-	rm -rf *.c *.o *.so core build
+-
+-build/lib.linux-$(ARCH)-$(PYTHON_VERSION)/fakekey.so: fakekey.pyx Makefile setup.py
+-	python$(PYTHON_VERSION) setup.py build
+-

debian/pyneo-zadosk/patches/series

@@ -0,0 +1 @@
+remove-makefile.patch

debian/pyneo-zadosk/pycompat

@@ -0,0 +1 @@
+2

debian/pyneo-zadosk/pyversions

@@ -0,0 +1 @@
+2.5-

debian/pyneo-zadosk/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

debian/pyneo-zadosk/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/pyneo-zadthemes/compat

@@ -0,0 +1 @@
+7

debian/pyneo-zadthemes/control

@@ -0,0 +1,13 @@
+Source: pyneo-zadthemes
+Section: python
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7), python-support (>= 0.5.3), python
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: pyneo-zadthemes
+Architecture: all
+Depends: ${misc:Depends}, ${python:Depends}
+Description: short description
+ a longer description

debian/pyneo-zadthemes/copyright

@@ -0,0 +1,30 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 23 June 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2008-2009 M. Dietrich <mdt@pyneo.org>
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+For the Debian packaging:
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/pyneo-zadthemes/pycompat

@@ -0,0 +1 @@
+2

debian/pyneo-zadthemes/pyversions

@@ -0,0 +1 @@
+2.5-

debian/pyneo-zadthemes/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

debian/pyneo-zadthemes/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/pyneo-zadwm/compat

@@ -0,0 +1 @@
+7

debian/pyneo-zadwm/control

@@ -0,0 +1,13 @@
+Source: pyneo-zadwm
+Section: python
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7), python-support (>= 0.5.3), python
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: pyneo-zadwm
+Architecture: all
+Depends: ${misc:Depends}, ${python:Depends}, python-evas, python-ecore, python-xpyb
+Description: short description
+ a meaningful longer description

debian/pyneo-zadwm/copyright

@@ -0,0 +1,30 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 23 June 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2008-2009 M. Dietrich <mdt@pyneo.org>
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+For the Debian packaging:
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/pyneo-zadwm/patches/remove-makefile.patch

@@ -0,0 +1,37 @@
+--- a/Makefile
++++ /dev/null
+@@ -1,34 +0,0 @@
+-#!/usr/bin/env make -f
+-EPATH=/opt/e17
+-#HOST=murphy
+-#HOST=gta01
+-#HOST=gta02
+-#HOST=user@ben
+-HOST=metab
+-#XTRACE=xtrace -D :2 -n
+-ARCH=`uname -m`
+-PYTHON_VERSION=2.6
+-.PHONY: run dbg all clean x11
+-
+-all:
+-	./setup.py build
+-
+-install:
+-	./setup.py install
+-
+-run:
+-	DISPLAY=:1 \
+-	PYTHONPATH=. \
+-	$(XTRACE) \
+-	python -u bin/zadwm resources/
+-
+-dbg:
+-	rsync --verbose --archive --delete ../zadwm mdt@$(HOST):pyneo/.
+-
+-x11:
+-	Xephyr :1 -dpi 144 -screen 800x450 &!
+-	#wetab: 1366x768
+-
+-clean:
+-	rm -f *.c *.pyx *.so *.o data pics *.pyo *.pyc
+-

debian/pyneo-zadwm/patches/series

@@ -0,0 +1 @@
+remove-makefile.patch

debian/pyneo-zadwm/pycompat

@@ -0,0 +1 @@
+2

debian/pyneo-zadwm/pyversions

@@ -0,0 +1 @@
+2.5-

debian/pyneo-zadwm/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

debian/pyneo-zadwm/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/python-ijon/compat

@@ -0,0 +1 @@
+7

debian/python-ijon/control

@@ -0,0 +1,13 @@
+Source: python-ijon
+Section: python
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7), python-support (>= 0.5.3), python
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: python-ijon
+Architecture: all
+Depends: ${misc:Depends}, ${python:Depends}, python-dbus, python-ecore, python-edbus
+Description: ijon
+ meaningful description.

debian/python-ijon/copyright

@@ -0,0 +1,29 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 31 Oct 2009 20:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2008-2009 M. Dietrich <mdt@pyneo.org>
+
+For the Debian packaging:
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/python-ijon/patches/remove-makefile.patch

@@ -0,0 +1,65 @@
+Index: python-ijon-0.4/Makefile
+===================================================================
+--- python-ijon-0.4.orig/Makefile	2010-08-25 11:05:14.000000000 +0000
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
+@@ -1,60 +0,0 @@
+-#!/usr/bin/env make -f
+-#HOST=murphy
+-#HOST=gta01
+-HOST=gta02
+-EPATH=/opt/e17
+-
+-.PHONY: all
+-all:
+-	PATH=$(PATH):$(EPATH)/bin \
+-	LD_LIBRARY_PATH=$(EPATH)/lib \
+-	PYTHONPATH=$(EPATH)/lib/python2.5/site-packages:src \
+-	./setup.py bdist
+-
+-.PHONY: run
+-run:
+-	LD_LIBRARY_PATH=$(EPATH)/lib \
+-	PYTHONPATH=$(EPATH)/lib/python2.5/site-packages:src \
+-	./src/ijon/run.py data/ijon.ini
+-
+-.PHONY: dbg
+-dbg: clean
+-	rsync --verbose --archive --delete ijon/. root@$(HOST):/usr/share/pyshared/ijon/.
+-
+-.PHONY: clean
+-clean:
+-	for n in `cat ../.gitignore`; do \
+-		if echo $$n | grep -q /; then \
+-			rm -rfv "$$n"; \
+-		else \
+-			find . -name "$$n" | xargs rm -fv; \
+-		fi \
+-	done
+-
+-.PHONY: docs
+-docs: docs/index.html
+-
+-docs/index.html: Makefile
+-	mkdir -p docs
+-	LD_LIBRARY_PATH=$(EPATH)/lib \
+-	PYTHONPATH=$(EPATH)/lib/python2.5/site-packages:src \
+-	epydoc \
+-		--css=data/epydoc.css \
+-		--debug \
+-		--docformat=restructuredtext \
+-		--graph=classtree \
+-		--graph-font-size=32 \
+-		--graph-font='Vera' \
+-		--html \
+-		--include-log \
+-		--name='ijon - documentation' \
+-		--navlink=Home \
+-		--no-imports \
+-		--no-private \
+-		--no-sourcecode \
+-		--output=docs \
+-		--quiet \
+-		--simple-term \
+-		--url=http://www.paroli-project.org/ \
+-		src/ijon/*.py
+-

debian/python-ijon/patches/series

@@ -0,0 +1 @@
+remove-makefile.patch

debian/python-ijon/pycompat

@@ -0,0 +1 @@
+2

debian/python-ijon/pyversions

@@ -0,0 +1 @@
+2.5-

debian/python-ijon/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

debian/python-ijon/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/python-pyneo/compat

@@ -0,0 +1 @@
+7

debian/python-pyneo/control

@@ -0,0 +1,14 @@
+Source: python-pyneo
+Section: python
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7), python-support (>= 0.5.3), python
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: python-pyneo
+Architecture: all
+Depends: ${misc:Depends}, ${python:Depends}, python-simplejson, python-crypto, python-dbus, python-ctypes, python-sqlite
+Description: pyneo mobile stack: basis libraries
+ Helper modules to support development for and with pyneo in Python. It
+ contains common functions, modules and constants.

debian/python-pyneo/copyright

@@ -0,0 +1,30 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 23 June 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2008-2009 M. Dietrich <mdt@pyneo.org>
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+For the Debian packaging:
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/python-pyneo/patches/remove-makefile.patch

@@ -0,0 +1,58 @@
+Index: python-pyneo-1.32/Makefile
+===================================================================
+--- python-pyneo-1.32.orig/Makefile	2010-08-24 19:50:28.000000000 +0000
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
+@@ -1,53 +0,0 @@
+-#!/usr/bin/env make -f
+-#HOST=murphy
+-#HOST=gta01
+-HOST=gta02
+-
+-.PHONY: all
+-all: clean
+-	./setup.py bdist
+-
+-.PHONY: run
+-run:
+-	PYTHONPATH=. python pyhttpd.py
+-
+-.PHONY: dbg
+-dbg: clean
+-	rsync --verbose --archive pyneo/. root@$(HOST):/usr/share/pyshared/pyneo/.
+-
+-.PHONY: clean
+-clean:
+-	for n in `cat ../.gitignore`; do \
+-		if echo $$n | grep -q /; then \
+-			rm -rfv "$$n"; \
+-		else \
+-			find . -name "$$n" | xargs rm -fv; \
+-		fi \
+-	done
+-
+-.PHONY: docs
+-docs: docs/index.html
+-
+-docs/index.html: pyneo/**/*.py Makefile
+-	mkdir -p docs
+-	epydoc \
+-		--css=data/epydoc.css \
+-		--debug \
+-		--docformat=restructuredtext \
+-		--graph=classtree \
+-		--graph-font-size=32 \
+-		--graph-font='Vera' \
+-		--html \
+-		--include-log \
+-		--name='pyneo - documentation' \
+-		--navlink=Home \
+-		--no-imports \
+-		--no-private \
+-		--no-sourcecode \
+-		--output=docs \
+-		--quiet \
+-		--simple-term \
+-		--top=pyneo.interfaces \
+-		--url=http://pyneo.org/ \
+-		pyneo
+-

debian/python-pyneo/patches/series

@@ -0,0 +1 @@
+remove-makefile.patch

debian/python-pyneo/pycompat

@@ -0,0 +1 @@
+2

debian/python-pyneo/pyversions

@@ -0,0 +1 @@
+2.5-

debian/python-pyneo/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

debian/python-pyneo/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/zad/compat

@@ -0,0 +1 @@
+7

debian/zad/control

@@ -0,0 +1,13 @@
+Source: zad
+Section: python
+Priority: extra
+Maintainer: Johannes Schauer <josch@pyneo.org>
+Build-Depends: debhelper (>= 7), python-support (>= 0.5.3), python
+Standards-Version: 3.9.1
+Homepage: http://pyneo.org
+
+Package: zad
+Architecture: all
+Depends: ${misc:Depends}, ${python:Depends}, python-ecore, python-evas, python-ijon, python-pyneo
+Description: a short description
+ a more lengthy description

debian/zad/copyright

@@ -0,0 +1,30 @@
+This package was debianized by Johannes Schauer <josch@pyneo.org> on
+Tue, 23 June 2009 10:08:51 +0000.
+
+It was downloaded from <http://pyneo.org>
+
+Upstream Authors:
+
+ * Copyright © 2008-2009 M. Dietrich <mdt@pyneo.org>
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+For the Debian packaging:
+ * Copyright © 2009 Johannes Schauer <josch@pyneo.org>
+
+License:
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL-3'.

debian/zad/patches/remove-makefile.patch

@@ -0,0 +1,49 @@
+--- a/Makefile
++++ /dev/null
+@@ -1,46 +0,0 @@
+-#!/usr/bin/env make -f
+-#HOST=murphy
+-#HOST=gta01
+-#HOST=gta02
+-HOST=metab.home.emdete.de
+-
+-.PHONY: all docs clean dbg run
+-all:
+-	./setup.py bdist
+-
+-run:
+-	DISPLAY=:1 \
+-	PYTHONPATH=mockup:. \
+-	python -u ./bin/zad data/zad.ini
+-
+-dbg: clean
+-	rsync --verbose --archive --delete plugins/. root@$(HOST):/usr/share/zad/.
+-
+-clean:
+-
+-docs: docs/index.html
+-
+-docs/index.html: Makefile
+-	mkdir -p docs
+-	LD_LIBRARY_PATH=$(EPATH)/lib \
+-	PYTHONPATH=$(EPATH)/lib/python2.6/site-packages:../../pyneo/python-pyneo:../../pyneo/python-pyneopads:../ijon/src \
+-	epydoc \
+-		--css=data/epydoc.css \
+-		--debug \
+-		--docformat=restructuredtext \
+-		--graph=classtree \
+-		--graph-font-size=32 \
+-		--graph-font='Vera' \
+-		--html \
+-		--include-log \
+-		--name='zad - documentation' \
+-		--navlink=Home \
+-		--no-imports \
+-		--no-private \
+-		--no-sourcecode \
+-		--output=docs \
+-		--quiet \
+-		--simple-term \
+-		--url=http://pyneo.org/ \
+-		plugins/dashboard/*.py
+-

debian/zad/patches/series

@@ -0,0 +1 @@
+remove-makefile.patch

debian/zad/pycompat

@@ -0,0 +1 @@
+2

debian/zad/pyversions

@@ -0,0 +1 @@
+2.5-

debian/zad/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@

debian/zad/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

pyneo-daily.sh

@@ -0,0 +1,259 @@
+#!/bin/sh -e
+
+# use apt-cacher
+# use 2.5G tmpfs
+# mount -t tmpfs -o size=2500M tmpfs /tmp/ramdisk
+
+PWD="`pwd`"
+SRC_DIR="$PWD/src"
+DEB_DIR="$PWD/debian"
+REPO_DIR="$PWD/repo"
+POOL_DIR="$REPO_DIR/pool"
+QEMUCONF="$PWD/qemuconfig"
+BASE="$PWD/base"
+BUILD="$PWD/build"
+DATENOW="`date -u +%Y%m%d`"
+DEBMIRROR="http://localhost:3142/ftp.de.debian.org/debian"
+DIST=sid
+HOSTARCH="`dpkg --print-architecture`"
+MAINTAINER=1
+
+mkdir -p "$SRC_DIR"
+mkdir -p "$REPO_DIR"
+mkdir -p "$BUILD"
+mkdir -p "$BASE"
+rm -rf "$SRC_DIR/"*
+rm -rf "$REPO_DIR/"*
+rm -rf "$BUILD/"*
+
+#############################################################################
+#                            common functions                               #
+#############################################################################
+
+create_cow()
+{
+	if [ ! -d "$BASE/$1.cow" ]; then
+		cowbuilder --create --distribution $DIST --basepath "$BASE/$1.cow" \
+			--architecture $1 --buildplace $BUILD \
+			--buildresult $POOL_DIR --mirror $DEBMIRROR \
+			--aptcache ""
+	fi
+}
+
+build_cow()
+{
+	cowbuilder --build "$2" --basepath "$BASE/$1.cow" --buildplace $BUILD \
+		--buildresult $POOL_DIR --mirror $DEBMIRROR --aptcache ""
+}
+
+# qemubuilder config has to be created dynamically because BASEPATH needs to
+# be absolute
+create_qemu()
+{
+	if [ ! -f "$BASE/$1.qemu" ]; then
+		cat > "$BASE/$1.conf" << __EOF__
+ARCH=$1
+MEMORY_MEGS=256
+BASEPATH=$BASE/$1.qemu
+MIRRORSITE=$DEBMIRROR
+BUILDPLACE=$BUILD
+BUILDRESULT=$POOL_DIR
+ARCH_DISKDEVICE=sd
+DISTRIBUTION=$DIST
+__EOF__
+		case "$1" in
+			"i386")
+				echo "KERNEL_IMAGE=$QEMUCONF/i386/vmlinuz-2.6.32-5-686" >> "$BASE/$1.conf"
+				echo "INITRD=$QEMUCONF/i386/initrd.img-2.6.32-5-686" >> "$BASE/$1.conf"
+				;;
+			"amd64")
+				echo "KERNEL_IMAGE=$QEMUCONF/amd64/vmlinuz-2.6.32-5-amd64" >> "$BASE/$1.conf"
+				echo "INITRD=$QEMUCONF/amd64/initrd.img-2.6.32-5-amd64" >> "$BASE/$1.conf"
+				;;
+			"armel")
+				echo "KERNEL_IMAGE=$QEMUCONF/armel/zImage-2.6.29.4" >> "$BASE/$1.conf"
+				;;
+			"mipsel")
+				echo "KERNEL_IMAGE=$QEMUCONF/mipsel/vmlinux-2.6.32-5-4kc-malta" >> "$BASE/$1.conf"
+				;;
+		esac
+		qemubuilder --configfile "$BASE/$1.conf" --create
+	fi
+}
+
+build_qemu()
+{
+	qemubuilder --build "$2" --configfile "$BASE/$1.conf"
+}
+
+#############################################################################
+#                        create qemubuilder base                            #
+#############################################################################
+
+case "$HOSTARCH" in
+	"i386")
+		create_cow i386
+		create_qemu amd64
+		create_qemu armel
+		create_qemu mipsel
+		;;
+	"amd64")
+		create_cow i386
+		create_cow amd64
+		create_qemu armel
+		create_qemu mipsel
+		;;
+	"armel")
+		create_qemu i386
+		create_qemu amd64
+		create_cow armel
+		create_qemu mipsel
+		;;
+	"mipsel")
+		create_qemu i386
+		create_qemu amd64
+		create_qemu armel
+		create_cow mipsel
+		;;
+	*)
+		echo "unknown host architecture: $HOSTARCH"
+		exit 1
+		;;
+esac
+
+#############################################################################
+#                          build source packages                            #
+#############################################################################
+
+curl http://git.pyneo.org/browse/cgit/pyneo/snapshot/pyneo-HEAD.tar.gz | tar xz
+for src in gsm0710muxd pyneo-pybankd pyneo-pyneod pyneo-resolvconf python-pyneo zad; do # add pyneo-pygsmd?
+	cp -r "pyneo-HEAD/$src" "$SRC_DIR/$src"
+done
+rm -rf pyneo-HEAD
+
+for repo in pyneo-zadthemes pyneo-zadosk pyneo-zadwm python-ijon; do
+	curl http://git.pyneo.org/browse/cgit/$repo/snapshot/$repo-HEAD.tar.gz | tar xz
+	mv "$repo-HEAD" "$SRC_DIR/$repo"
+done
+
+for pkg in "$SRC_DIR/"*; do
+	PKG="${pkg##*/}" # emulate basename(1)
+	mv "$SRC_DIR/$PKG" "$SRC_DIR/$PKG-$DATENOW"
+	tar --directory "$SRC_DIR" --create --gzip --file "$SRC_DIR/${PKG}_$DATENOW.orig.tar.gz" "$PKG-$DATENOW"
+	cp -r "$DEB_DIR/$PKG" "$SRC_DIR/$PKG-$DATENOW/debian"
+	DEBEMAIL="josch@pyneo.org" DEBFULLNAME="Johannes Schauer" dch --package "$PKG" --newversion "$DATENOW-$MAINTAINER" \
+		--distribution unstable --empty --changelog "$SRC_DIR/$PKG-$DATENOW/debian/changelog" --create "new nightly build"
+	cd "$SRC_DIR/$PKG-$DATENOW"
+	dpkg-buildpackage -S -us -uc
+	cd "../../"
+done
+
+mkdir -p "$POOL_DIR"
+mv "$SRC_DIR/"*_* "$POOL_DIR"
+
+#############################################################################
+#                         build binary packages                             #
+#############################################################################
+
+for dsc in "$POOL_DIR/"*.dsc; do
+	if grep "^Architecture: all$" "$dsc" > /dev/null; then
+		# build native
+		build_cow $HOSTARCH "$dsc"
+	else
+		# build for each arch
+		case "$HOSTARCH" in
+			"i386")
+				build_cow i386 "$dsc"
+				build_qemu amd64 "$dsc"
+				build_qemu armel "$dsc"
+				build_qemu mipsel "$dsc"
+				;;
+			"amd64")
+				build_cow i386 "$dsc"
+				build_cow amd64 "$dsc"
+				build_qemu armel "$dsc"
+				build_qemu mipsel "$dsc"
+				;;
+			"armel")
+				build_qemu i386 "$dsc"
+				build_qemu amd64 "$dsc"
+				build_cow armel "$dsc"
+				build_qemu mipsel "$dsc"
+				;;
+			"mipsel")
+				build_qemu i386 "$dsc"
+				build_qemu amd64 "$dsc"
+				build_qemu armel "$dsc"
+				build_cow mipsel "$dsc"
+				;;
+			*)
+				echo "unknown host architecture: $HOSTARCH"
+				exit 1
+				;;
+		esac
+	fi
+done
+
+#############################################################################
+#                           create repository                               #
+#############################################################################
+
+for arch in i386 amd64 armel mipsel; do
+	mkdir -p "$REPO_DIR/dists/unstable/main/binary-$arch"
+	cat > "$REPO_DIR/dists/unstable/main/binary-$arch/Release" << __EOF__
+Archive: unstable
+Component: main
+Origin: Debian
+Label: Debian
+Architecture: $arch
+__EOF__
+done
+
+mkdir -p "$REPO_DIR/dists/unstable/main/source"
+cat > "$REPO_DIR/dists/unstable/main/source/Release" << __EOF__
+Archive: unstable
+Component: main
+Origin: Debian
+Label: Debian
+Architecture: source
+__EOF__
+
+ln -s unstable "$REPO_DIR/dists/sid"
+
+cd "$REPO_DIR"
+dpkg-scanpackages --arch i386 pool/ > dists/unstable/main/binary-i386/Packages
+bzip2 -9fk dists/unstable/main/binary-i386/Packages
+gzip -9f dists/unstable/main/binary-i386/Packages
+dpkg-scanpackages --arch amd64 pool/ > dists/unstable/main/binary-amd64/Packages
+bzip2 -9fk dists/unstable/main/binary-amd64/Packages
+gzip -9f dists/unstable/main/binary-amd64/Packages
+dpkg-scanpackages --arch armel pool/ > dists/unstable/main/binary-armel/Packages
+bzip2 -9fk dists/unstable/main/binary-armel/Packages
+gzip -9f dists/unstable/main/binary-armel/Packages
+dpkg-scanpackages --arch mipsel pool/ > dists/unstable/main/binary-mipsel/Packages
+bzip2 -9fk dists/unstable/main/binary-mipsel/Packages
+gzip -9f dists/unstable/main/binary-mipsel/Packages
+dpkg-scansources pool/ > dists/unstable/main/source/Sources
+bzip2 -9fk dists/unstable/main/source/Sources
+gzip -9f dists/unstable/main/source/Sources
+cd ../
+
+cd "$REPO_DIR/dists"
+cat > unstable/Release << __EOF__
+Origin: pyneo
+Label: pyneo
+Suite: unstable
+Codename: sid
+Date: `date -R`
+Architectures: amd64 armel i386 mipsel
+Components: main
+Description: pyneo dailies
+MD5Sum:
+__EOF__
+for f in `find . -regex "./unstable/main/[^/]+/\(Packages\|Sources\|\Release\).*"`; do
+	md5sum $f | awk '{printf " %s ", $1}' >> unstable/Release
+	stat --printf="%s\t%n\n" $f >> unstable/Release
+done
+cd ../..
+
+#gpg --detach-sign --armor --sign -o $REPO_DIR/Release.gpg $REPO_DIR/Release