release 1.4.3

Thanks: Guillem Jover <guillem@debian.org>, Sven Joachim <svenjoac@gmx.de>

CHANGELOG.md

@@ -1,3 +1,8 @@
+1.4.3 (2024-02-01)
+------------------
+
+ - take hard links into account when computing disk usage
+
 1.4.2 (2024-01-29)
 ------------------
 

coverage.txt

@@ -365,11 +365,11 @@ Variants: custom
 Modes: chrootless
 Needs-APT-Config: true
 
-Test: install-libmagic-mgc-on-arm64
+Test: install-libmagic-mgc-on-foreign
 Variants: custom
 Modes: chrootless
 Skip-If:
- hostarch != "amd64"
+ hostarch not in ["amd64", "arm64"]
  not have_binfmt
 
 Test: install-busybox-based-sub-essential-system
@@ -380,6 +380,7 @@ Modes: root unshare fakechroot
 Skip-If:
  hostarch not in ["amd64", "arm64"]
  mode == "fakechroot" and not run_ma_same_tests
+ mode == "fakechroot" and hostarch == "arm64" # usrmerge postinst under fakechroot wants to copy /lib/ld-linux-x86-64.so.2 (which does not exist) instead of /lib64/ld-linux-x86-64.so.2
  not have_binfmt
 
 Test: no-sbin-in-path

mmdebstrap

@@ -23,7 +23,7 @@
 use strict;
 use warnings;
 
-our $VERSION = '1.4.2';
+our $VERSION = '1.4.3';
 
 use English;
 use Getopt::Long;
@@ -1551,34 +1551,41 @@ sub setup_mounts {
         if (any { $_ eq 'chroot/start-stop-daemon' } @{ $options->{skip} }) {
             info "skipping chroot/start-stop-daemon as requested";
         } else {
+            # $options->{root} must not be part of $ssdloc but must instead be
+            # evaluated at the time the cleanup is run or otherwise, when
+            # performing a pivot-root, the ssd location will still be prefixed
+            # with the chroot path even though we changed root
             my $ssdloc;
             if (-f "$options->{root}/sbin/start-stop-daemon") {
-                $ssdloc = "$options->{root}/sbin/start-stop-daemon";
+                $ssdloc = "/sbin/start-stop-daemon";
             } elsif (-f "$options->{root}/usr/sbin/start-stop-daemon") {
-                $ssdloc = "$options->{root}/usr/sbin/start-stop-daemon";
+                $ssdloc = "/usr/sbin/start-stop-daemon";
             }
             push @cleanup_tasks, sub {
                 return unless length $ssdloc;
-                if (-e "$ssdloc.REAL") {
-                    move("$ssdloc.REAL", "$ssdloc")
-                      or error "cannot move start-stop-daemon: $!";
-                    warning "/sbin/start-stop-daemon fake replaced with real";
+                if (-e "$options->{root}/$ssdloc.REAL") {
+                    move(
+                        "$options->{root}/$ssdloc.REAL",
+                        "$options->{root}/$ssdloc"
+                    ) or error "cannot move start-stop-daemon: $!";
                 }
             };
             if (length $ssdloc) {
-                if (-e "$ssdloc.REAL") {
-                    error "$ssdloc.REAL already exists";
+                if (-e "$options->{root}/$ssdloc.REAL") {
+                    error "$options->{root}/$ssdloc.REAL already exists";
                 }
-                move("$ssdloc", "$ssdloc.REAL")
-                  or error "cannot move start-stop-daemon: $!";
-                open my $fh, '>', $ssdloc
+                move(
+                    "$options->{root}/$ssdloc",
+                    "$options->{root}/$ssdloc.REAL"
+                ) or error "cannot move start-stop-daemon: $!";
+                open my $fh, '>', "$options->{root}/$ssdloc"
                   or error "cannot open start-stop-daemon: $!";
                 print $fh "#!/bin/sh\n";
                 print $fh
                   "echo \"Warning: Fake start-stop-daemon called, doing"
                   . " nothing\">&2\n";
                 close $fh;
-                chmod 0755, "$ssdloc"
+                chmod 0755, "$options->{root}/$ssdloc"
                   or error "cannot chmod start-stop-daemon: $!";
             }
         }
@@ -4386,19 +4393,27 @@ sub approx_disk_usage {
     # We ignore /dev because depending on the mode, the directory might be
     # populated or not and we want consistent disk usage results independent
     # of the mode.
-    my $installed_size      = 0;
+    my $installed_size = 0;
+    my %hardlink;
     my $scan_installed_size = sub {
         if ($File::Find::name eq "$directory/dev") {
             # add all entries of @devfiles once
             $installed_size += scalar @devfiles;
+            return;
         } elsif ($File::Find::name =~ /^$directory\/dev\//) {
             # ignore everything below /dev
-        } elsif (-l $File::Find::name) {
-            # -f follows symlinks, so we first check if we have a symlink
-            $installed_size += 1;
-        } elsif (-f $File::Find::name) {
+            return;
+        }
+
+        lstat or error "cannot stat $File::Find::name";
+
+        if (-f _ or -l _) {
+            my ($dev, $ino, $nlink) = (lstat _)[0, 1, 3];
+            return if exists $hardlink{"$dev:$ino"};
+            # Track hardlinks to avoid repeated additions.
+            $hardlink{"$dev:$ino"} = 1 if $nlink > 1;
             # add file size in 1024 byte blocks, rounded up
-            $installed_size += int(((-s $File::Find::name) + 1024) / 1024);
+            $installed_size += int(((-s _) + 1024) / 1024);
         } else {
             # all other entries are assumed to only take up one block
             $installed_size += 1;
@@ -5212,6 +5227,12 @@ sub main() {
         }
     }
 
+    if (defined $options->{qemu} && $options->{mode} eq 'fakechroot') {
+        if (!can_execute 'dpkg-architecture') {
+            error "cannot find dpkg-architecture";
+        }
+    }
+
     {
         $options->{suite} = undef;
         if (scalar @ARGV > 0) {

mmdebstrap-autopkgtest-build-qemu

@@ -298,6 +298,16 @@ WORKDIR=$(mktemp -d)
 FAT_OFFSET_SECTORS=$((1024*2))
 FAT_SIZE_SECTORS=$((1024*254))
 
+# The image is raw and not in qcow2 format because:
+#  - faster run-time as the "qemu-image convert" step is not needed
+#  - image can be used independent of qemu tooling
+#  - modifying the image just with "mount" instead of requiring qemu-nbd
+#  - sparse images make the file just as small as with qcow2
+#  - trim support is more difficult on qcow2
+#  - snapshots and overlays work just as well with raw images
+#  - users who prefer qcow2 get to choose to run it themselves with their own
+#    custom options like compression
+#
 # Make the image writeable to the first subgid. mmdebstrap will map this gid to
 # the root group. unshare instead will map the current gid to 0 and the first
 # subgid to 1. Therefore mmdebstrap will be able to write to the image.

tests/install-libmagic-mgc-on-foreign

@@ -17,13 +17,27 @@ if [ "$(id -u)" -eq 0 ] && [ "{{ MODE }}" != "root" ] && [ "{{ MODE }}" != "auto
 	prefix="runuser -u ${SUDO_USER:-user} --"
 fi
 
-$prefix {{ CMD }} --mode={{ MODE }} --variant={{ VARIANT }} --architectures=arm64 --include=libmagic-mgc {{ DIST }} /tmp/debian-chroot {{ MIRROR }}
+case "$(dpkg --print-architecture)" in
+	arm64)
+		foreign_arch=amd64
+		;;
+	amd64)
+		foreign_arch=arm64
+		;;
+	*)
+		echo "unsupported native architecture" >&2
+		exit 1
+		;;
+esac
+
+$prefix {{ CMD }} --mode={{ MODE }} --variant={{ VARIANT }} --architectures="$foreign_arch" --include=libmagic-mgc {{ DIST }} /tmp/debian-chroot {{ MIRROR }}
 # delete contents of libmagic-mgc
 rm /tmp/debian-chroot/usr/lib/file/magic.mgc
 rm /tmp/debian-chroot/usr/share/doc/libmagic-mgc/README.Debian
 rm /tmp/debian-chroot/usr/share/doc/libmagic-mgc/changelog.Debian.gz
 rm /tmp/debian-chroot/usr/share/doc/libmagic-mgc/changelog.gz
 rm /tmp/debian-chroot/usr/share/doc/libmagic-mgc/copyright
+rm /tmp/debian-chroot/usr/share/doc/libmagic-mgc/"changelog.Debian.$foreign_arch.gz"
 rm /tmp/debian-chroot/usr/share/file/magic.mgc
 rm /tmp/debian-chroot/usr/share/misc/magic.mgc
 # delete real files